SKF SNH 508-607 split plummer block housing
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- SNH split plummer block housing
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SNH 508-607 belongs to split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SNH 508-607 and any equivalents.
For maintenance teams working on shafts that are hard to reach, the SNH SKF split plummer block housing offers a practical answer: the housing separates into two halves, so the bearing can be placed or removed without pulling the shaft out of the machine. That keeps repair time down on equipment where a full teardown is not an option.
Reading the code helps you order the right piece. SNH identifies the split plummer block housing series, and the digits that follow set the size. A reference such as SNH 505 matches one shaft diameter, while SNH 506-605 covers two possible shaft diameters, depending on which bearing goes inside. Suffixes can point to sealing or locking variations, so it pays to confirm the full part number before ordering.
You will find these housings on conveyors, mills, mixers, pumps and fans, and on low and medium speed transmission shafts. Plants handling food, cement, mining and aggregates rely on them because dust and moisture are part of daily operation and the housing has to hold up. Sealing choice matters here: labyrinth seals or radial shaft seals, depending on how much contamination is present. Lubrication has to be right, and when mounting, the two halves must be aligned so the bearing does not pick up extra load. Bolt tightening follows the manufacturer's instructions.
Housings built to the same dimensional standard can be swapped between brands. For a replacement, line up the complete designation along with the shaft and height dimensions. Variants are not always equal, so check the locking method and the seal type as well. If you are unsure about compatibility with another brand, send us the details and we can help you sort it out.
To get a quote, message the exact part number to MR Industrial Accessories on WhatsApp or by email. We serve customers throughout the United States and in several Latin American countries, and our team can suggest equivalent options and assist with selection.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does SNH indicate on a split plummer block housing?
- SNH is the series designation for a split plummer block housing. The letters refer to the split construction, and the numbers that follow define the size and the shaft diameter it accepts. Several brands use this same naming convention.
- How do I pick the correct SNH housing?
- Start with the shaft diameter and the bearing type, then factor in the load and the working environment. Sealing and lubrication also play a role. Manufacturer tables are a good reference, and if anything is unclear, send us your equipment data and we will help.
- Can I replace an SNH housing with one from a different brand?
- If both follow the same dimensional standard, they are generally interchangeable. Still, confirm the shaft, height and locking dimensions, plus the sealing style, since these can differ from one maker to another.