SKF SILKB 16 F spherical plain bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical plain bearings and rod ends
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SILKB 16 F belongs to spherical plain bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SILKB 16 F and any equivalents.
Rod ends in the SKF SILKB F line work as spherical joints, letting a shaft pivot at an angle when the two parts are not perfectly in line. You will find them in linkages, suspension components and power transmission setups that need controlled oscillation. MR Industrial Accessories supplies this SKF line and can help you match the right unit to your mechanism.
The code itself tells you most of what you need. SILKB identifies the series: a radial rod end with an internal thread. The figure that follows is the bore size in millimeters, so SILKB 5 F takes a 5 mm shaft, SILKB 8 F an 8 mm shaft, and SILKB 12 F a 12 mm shaft. The trailing F points to a surface treatment or build variant intended to resist corrosion. Reading the part number this way lets a maintenance planner confirm size and variant before ordering.
Typical applications include automotive controls, farm equipment, earthmoving machines, and hydraulic or pneumatic circuits. Any joint that has to articulate under combined loads is a candidate. The design tolerates misalignment, which helps in dirty or vibrating installations where rigid connections would bind.
When specifying a SILKB F rod end, start with bore diameter, then confirm thread type and the load the joint will see. If dust or moisture is present, look at sealed versions. During installation, keep the mating shafts aligned so the rod end is not forced sideways. Regular greasing supports a longer service interval, though some units are lubricated for life. Check the permitted axial and radial clearance against your application.
SKF rod ends can replace units from other recognized manufacturers when dimensions and thread match. If the original part number is worn or missing, send us measurements or a photo and we will help identify an equivalent.
For a quote on SILKB F rod ends, message the part number on WhatsApp or by email. Our team replies promptly and can suggest equivalents or assist with selection.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the F suffix mean on a SILKB rod end?
- It indicates a variant with a surface treatment or configuration, usually to improve corrosion resistance. Main dimensions stay the same. Send us the full part number if you need the exact characteristics confirmed.
- How do I pick the right SILKB rod end size?
- The number in the part number is the bore diameter in millimeters, so SILKB 8 F has an 8 mm bore. Also check thread type and load. If you are unsure, share your shaft measurements and we will help you choose.
- Can SKF rod ends be used in place of other brands?
- They are interchangeable with other brands when dimensions and thread type match. Do not rely on the part number alone; compare the actual measurements. We can help you find the correct equivalent.