SKF SIKAC 10 M/VZ019 spherical plain bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical plain bearings and rod ends
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SIKAC 10 M/VZ019 belongs to spherical plain bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SIKAC 10 M/VZ019 and any equivalents.
For linkage points that need to pivot and absorb misalignment, the SKF SIKAC M/VZ line covers spherical rod ends with a male thread. They handle combined loads while allowing the movement typical of steering arms, suspension links, actuators and similar mechanisms. MR Industrial Accessories LLC supplies this line and can help you match the bore, thread and seal variant to your assembly.
Reading the code helps when you order. SIKAC is the series name for these male-thread rod ends with a steel cage. The M tells you the body carries a metric thread, and VZ means the retaining spring is made of stainless steel. What follows is the bore size, so SIKAC 10 M/VZ019 has a 10 bore and SIKAC 30 M/VZ019 a 30 bore. The trailing number, 019 in both examples, points to a sealing or surface treatment option. If your drawing calls for a particular variant, share it with us and we will check it against the code.
Typical installations include automotive steering, farm equipment, earthmoving machines, cranes and hydraulic circuits. You will also find them on chain tensioners and lifting linkages. Because they take radial and axial loads at the same time, they suit articulation joints that oscillate slowly or alternate direction, as long as you stay within the load capacity and the misalignment angle the joint allows.
Selection comes down to four things: bore diameter, male or female thread, sealing choice and internal clearance. Nitrile or polyurethane seals keep dust and moisture out and help the joint last longer in dirty environments. When mounting, line up the shafts properly and avoid forcing the rod end into a bent position. If the unit is not maintenance-free, lubricate it on a regular schedule with lithium grease. Tighten the thread to the specified torque and lock the position with a nut.
On interchangeability, a SKF SIKAC rod end can stand in for other brands built to the same dimensional and thread standard. Tolerances and seal design still need a check, since small differences show up in service. MR Industrial Accessories LLC supplies SKF and can point you to equivalents in other lines. Send the original part number and we will confirm the match.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What do the M and VZ letters mean in a SIKAC rod end?
- M means the body uses a metric male thread. VZ means the retaining spring is stainless steel. The figure right after SIKAC is the bore diameter, and the last number, such as 019, identifies a sealing or treatment variant. Tell us your application and we will confirm the exact code.
- When should I pick a male thread rod end instead of a female one?
- It depends on how the joint connects and how much room you have. A male thread screws into a component that has an internal thread, while a female version accepts a bolt or stud. Check the misalignment angle you need and whether there is access for mounting and adjustment.
- How often do these rod ends need grease?
- It varies with load, speed and working conditions. Dusty or wet locations call for more frequent greasing with lithium grease. Sealed versions follow the maker's guidance. Building the interval into a preventive maintenance plan is the practical way to manage it.