SKF SE 513-611 split plummer block housing
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- SE split plummer block housing
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SE 513-611 belongs to split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SE 513-611 and any equivalents.
The SKF SE series split housing is a bearing fixing component intended for cylindrical bore bearings mounted on shafts. Because it comes in two halves, the bearing can be positioned without taking the surrounding assembly apart, which keeps maintenance work simpler. It is used across many types of industrial equipment.
Reading the SE designation: the number that follows the series tells you the housing size, and certain designations cover more than one shaft diameter. SE 207, for instance, fits a bearing with a 35 mm bore; SE 208-307 works with either of two sizes; SE 507-606 is meant for larger shafts. Suffixes can point to design variants such as a different mounting hole layout or sealing arrangement, so it is worth checking the specific data sheet before ordering.
These housings appear in food processing, cement, mining, paper and material handling operations. Typical equipment includes conveyors, bucket elevators, mixers, mills and industrial fans. They handle moderate radial and axial loads, which suits demanding duty as long as the size is matched to the load and speed of the application.
Selection depends on shaft diameter, radial and axial load, and the environment where the housing will run. During assembly, line up the two halves and tighten the fixing bolts to the recommended torque. Lubrication of the bearing matters: confirm grease type and interval with the bearing manufacturer. In dusty or damp locations, extra seals can help the assembly last longer.
In terms of interchangeability, SKF SE series split housings can be replaced with products from other brands built to the same dimension standard. Tolerances and the exact design should still be checked before swapping a component. MR Industrial Accessories LLC supplies this line, and our team can compare critical dimensions and help you confirm the right replacement.
To replace a split housing, send the complete part number by WhatsApp or email. We can suggest equivalents and help you choose the correct option for your application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the designation SE 208-307 mean?
- It means the housing accepts two shaft diameters: 40 mm for the 208 series and 35 mm for the 307 series. The same housing can therefore be used with either shaft size.
- Does this housing include the bearing?
- No, the housing is supplied on its own. It is used with cylindrical bore bearings of the matching series. Contact us and we can help you identify the right bearing for your application.
- How is assembly performed?
- The split housing goes around the shaft and is fastened with bolts. Align the halves and apply the recommended torque. For lubrication, follow the bearing manufacturer's instructions.