SKF SDAFD 3288 T/Y10493 sAF split plummer block housing
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- SAF split plummer block housing
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SDAFD 3288 T/Y10493 belongs to sAF split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SDAFD 3288 T/Y10493 and any equivalents.
The SKF SAF split plummer block is a housing that supports spherical roller or ball bearings and can be opened to remove or install the shaft without taking the driveline apart. It suits rotating equipment that needs a firm seat and correct alignment.
The code tells you what you are ordering. SDAFD marks a split plummer block in the SAF series with its own sealing and mounting arrangement. The T/Y group identifies the seal style, and the number after it is the shaft size. Take SDAFD 3288 T/Y10493: a 3 15/16" shaft inside a housing with labyrinth sealing. Read the code this way and you can call out either the complete assembly or just the spare parts you need.
You will find these housings on conveyors, mills, pumps, fans and other process equipment in food, chemical and cement plants. Dust and humidity are common in grinding and material handling areas, so the seal does most of the work. Because the housing splits, a bearing can be serviced in place when access is tight.
Selection starts with the shaft diameter, the bearing that will sit in the housing and the conditions around it. T/Y sealing keeps contaminants out; where moisture is heavy, add further sealing. During installation, line up the two halves and bring the bolts down evenly so the housing does not distort. Use a lubricant compatible with the bearing and renew it on your maintenance schedule.
Housings in the SAF pattern from different makers can often be swapped when the dimensions and seal setup agree. SKF is one of the brands we supply and gives a dependable reference point, but measure before you replace anything. Whether the swap works comes down to the standard and the construction details.
Send the full code by WhatsApp or email and our team will come back with a quote. We can also point you to equivalent options and help you settle on the right housing for your equipment and operating conditions.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does SDAFD mean on a SAF housing?
- SDAFD is the designation for a split plummer block in the SAF series with a particular sealing and mounting layout. The T/Y suffix shows the seal type, and the number that follows is the shaft diameter. T/Y10493, for instance, fits a 3 15/16 inch shaft.
- How do I pick the correct housing?
- Look at the shaft diameter, the bearing it will hold and the surrounding conditions. T/Y sealing blocks dust and moisture. If the application is demanding, check compatibility with the existing bearing and ask our team.
- Can SAF housings from other makers replace an SKF unit?
- Sometimes, provided the dimensions, seal arrangement and standard line up. SKF is a brand we supply, but confirm the measurements and features before you substitute. Send the code by WhatsApp and we will advise.