SKF SAKAC 25 M spherical plain bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical plain bearings and rod ends
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SAKAC 25 M belongs to spherical plain bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SAKAC 25 M and any equivalents.
SKF SAKAC M rod ends are spherical plain bearings with a male thread. They permit oscillating movement and compensate for misalignment between shafts. Typical uses include control mechanisms, linkages and cylinders where smooth rotation and angle adjustment are needed. The metal body and sliding contact surface suit moderate loads in industrial and automotive settings. MR Industrial Accessories LLC supplies this line.
The SAKAC M code breaks down as follows: SAKAC denotes the series of male-thread rod ends with a steel cage, and the trailing M shows that the body carries a surface treatment. The digits after the base code give the nominal bore in millimeters. Threads are metric fine pitch, with dimensions standardized to each size.
You will find these rod ends in steering linkages, hydraulic controls, pneumatic cylinders, automatic doors, packaging machinery, tillage equipment and systems that transmit oscillating motion. They are common in metalworking, automotive and food processing plants, as well as in agricultural machinery manufacturing, where they absorb misalignment and vibration while keeping motion precise.
When choosing a SAKAC M rod end, consider bore diameter, thread type (male or female) and the permissible oscillation angle. During installation, make sure the rod end operates within its angular range and is not forced. Lubrication is permanent in most cases, but in dusty or damp conditions it is wise to protect the area with additional seals. Proper alignment between the shank and the support helps prevent premature wear.
For equivalents, SKF SAKAC M rod ends can be interchanged with other brands that use the same dimensional designation, such as the POS series or similar, provided the bore diameter, thread type and main dimensions match. Nomenclature varies between manufacturers, so always verify dimensions before replacing. MR Industrial Accessories LLC can assist with part number comparison.
To replace a SAKAC M rod end, send the complete part number via WhatsApp or email. Our team will quote it and help you identify the correct part for your application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the number in SAKAC 8 M mean?
- The 8 stands for the bore diameter in millimeters. In SAKAC 8 M, the bore is 8 mm. The final M indicates the body has a surface treatment. The male thread is metric fine pitch, standardized for that size.
- Can SAKAC M rod ends be lubricated?
- Most SAKAC M rod ends come with permanent lubrication and need no maintenance. In applications with heavy dirt or humidity, adding seals or oil seals is recommended to protect the sliding surface and extend service life.
- How do I know if a rod end from another brand is equivalent?
- Check that the bore diameter, thread type (male or female), pitch and main dimensions match. Even if the designation looks similar, differences can exist. Send the original part number via WhatsApp or email and we will help you compare.