SKF SAF 028 KAX5 split plummer block housing
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- SAF split plummer block housing
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SAF 028 KAX5 belongs to split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SAF 028 KAX5 and any equivalents.
The SKF SAF split plummer block is a two-piece housing designed so a bearing can be mounted or removed without pulling the shaft out of the line. It supports rotating shafts in industrial machinery and lets maintenance crews align and secure the bearing in place. MR Industrial Accessories LLC supplies this line to plants that need a sturdy housing and straightforward servicing.
A SAF code carries three pieces of information: housing size, shaft diameter and bearing type. Take SAF 028 KAX4.15/16. The 028 sets the housing series, 4.15/16 inches is the shaft it fits, and KAX identifies the bearing and its sealing options. Reading the code this way makes it easier to confirm the unit matches your shaft and load.
Typical installations include conveyors, mills, pumps, fans and mixers. Food, cement, mining and petrochemical operations use these housings where moderate radial and axial loads are present. MR Industrial Accessories LLC serves customers throughout the United States and in several Latin American countries.
Selection starts with shaft diameter, load and the conditions around the equipment. Seal choice follows the level of dust, moisture or heat at the mounting point. During installation, line up both halves, tighten the bolts and lubricate the bearing. Regular lubrication and periodic bolt checks help the assembly last.
SKF SAF housings can be swapped with units from other manufacturers that use the same mounting standard. For a replacement, compare mounting dimensions, bearing type and fixing method. MR Industrial Accessories LLC can suggest an equivalent and help you choose.
Have the complete housing part number and shaft details ready before you request a quote. Send them by WhatsApp or email and the team will reply promptly with the right option for your equipment.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the SAF designation mean on a split plummer block?
- SAF identifies a series of split housings for bearings. The number that follows shows the housing size, while suffixes such as KAX indicate the bearing and sealing. Matching the full code to your shaft and application avoids fitting errors.
- How do I choose the right SAF housing for my shaft?
- Start with the shaft diameter, then look at radial and axial load and the working environment. The SAF code states the shaft size in inches. MR Industrial Accessories LLC can help you read the designation and pick the correct housing.
- Are SKF SAF housings interchangeable with other brands?
- SAF housings follow dimensional standards that allow interchangeability between manufacturers. When replacing one, verify the mounting dimensions, bearing type and fixing system. MR Industrial Accessories LLC can confirm a suitable equivalent.