SKF RC-65X75 ELDL cylindrical roller

SKF RC-65X75 ELDL belongs to cylindrical roller, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for RC-65X75 ELDL and any equivalents.

SKF RC series rollers with the ELDL suffix are loose cylindrical rollers. They are the rolling elements of a roller bearing, supplied separately so you can replace a complete set or build a rolling support. Ordering uses the full designation, for example RC-65X75 ELDL, which gives the diameter and length in millimeters.

A loose cylindrical roller is exactly that: the rolling element of a roller bearing, sold on its own. Maintenance teams use them to renew worn or damaged rollers in a bearing that will be disassembled and reassembled, or to create guides and rolling supports in machines where no complete bearing is fitted and the raceway is machined directly into the component.

The SKF RC code carries the roller diameter and length in millimeters. In RC-8X8 C, the figures are 8 and 8; in RC-20X30 CD, diameter 20 and length 30. The trailing suffix identifies the roller execution as defined by SKF, and it has to be matched when replacing. Two rollers of the same size but different suffix are not interchangeable inside the same set.

For replacement, renew the whole set rather than individual rollers. Rollers with uneven wear share the load poorly, and the tallest one ends up carrying the load by itself, which is the quickest route to another failure. Also inspect the raceways: if they show marks or flaking, a new roller will not last.

To get a quote, send the complete designation shown on the product page, suffix included, along with the number of rollers in the set. If the part number is not available, the diameter, the length and a photo of the roller or of the bearing it comes from are sufficient. Our team replies promptly and can suggest equivalents and help with selection.