SKF PHS P76-1BH8X44MMNSKW sprockets and gears

SKF PHS P76-1BH8X44MMNSKW belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHS P76-1BH8X44MMNSKW and any equivalents.

The SKF PHS sprocket is a chain drive component that mounts on a shaft and engages a standard-pitch chain. It transmits motion and torque at a fixed ratio in equipment such as conveyors, machine tools, pumps and lifting systems. MR Industrial Accessories offers this line within its power transmission range and can help you match the sprocket to your chain pitch and shaft dimensions.

The PHS series code is divided into sections. The fixed letters are followed by the chain pitch and the number of strands, then the bushing or hub type and the bore diameter. The final section indicates the fastening system and material or treatment. For example, in PHS P76-1BH8X44MMNSKW, P76 is the pitch, 1 is the number of strands, BH8 is the bushing type, 44MM is the bore diameter and NSKW covers the finish or fastening. Since every suffix affects installation, review the entire code before ordering.

These sprockets are used in chain conveyors, packaging lines, woodworking machines, lifting equipment and low- to medium-speed drives. They appear in food processing, cement, leather and metalworking operations, where chains and sprockets face dust, moisture or frequent washdowns. They also serve as replacements on older machines when the pitch and tooth count match the existing chain.

For correct selection, start with the chain pitch and number of strands; these cannot be mixed. Next, confirm the bore diameter and fastening type, as they determine centering and freedom from axial play. Lubrication and alignment between sprocket and chain are critical to service life, since even slight misalignment speeds up wear on teeth and bushings. In dirty environments, guards or seals that keep particles off the chain are worth considering.

When comparing sprockets, look at pitch, number of teeth, bore diameter and bushing type rather than the manufacturer's part number. A sprocket from another brand with the same geometry may fit, but tolerances and material should be verified. MR Industrial Accessories supplies SKF and can help you find a compatible alternative for your chain.

If you have the sprocket part number, the chain pitch or a photo of the part, send it by WhatsApp or email to MR Industrial Accessories. That information allows us to identify the right configuration and prepare your quote. You can also ask about sprockets for shafts with keyway, taper bushings or specific fastenings, and about custom sprockets within the PHS line.