SKF PHS 60-1A68 sprockets and gears

SKF PHS 60-1A68 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHS 60-1A68 and any equivalents.

For roller chain drives with an 8 mm pitch, single strand, SKF offers the PHS 25-1A series of sprockets. These toothed wheels link parallel shafts in industrial machinery, and MR Industrial Accessories LLC supplies them within its power transmission selection. The team can help you determine the right tooth count and hub style for your specific setup.

The part number PHS 25-1A18 breaks down as follows: PHS denotes the SKF sprocket family, 25 stands for the 8 mm chain pitch, 1 means single strand, A specifies the hub configuration, and 18 gives the number of teeth. The series includes sizes from PHS 25-1A18 through PHS 25-1A25, covering 18 to 25 teeth. A higher tooth count reduces rotational speed at a given chain speed and distributes the load across more teeth.

Typical applications include chain drives on machine tools, conveyors, packaging equipment, bakery machinery, and packing lines. With an 8 mm pitch, these sprockets are appropriate for light loads and moderate speeds, such as those found on auxiliary shafts and feed mechanisms.

When choosing a sprocket, consider the number of teeth needed for the desired ratio and the space available. Verify that the hub diameter and bore fit the shaft. Proper alignment between sprocket and chain during installation prevents uneven wear. Follow the lubrication schedule for your operating conditions and check chain tension regularly. In dirty environments, consider guards or a suitable lubrication method.

SKF PHS 25-1A sprockets may be replaced by sprockets from other manufacturers if the pitch and tooth count match and the outside diameter, hub, and bore are compatible. Matching pitch alone is not sufficient; the hub type and fastening method must also align. If you are unsure, provide the full part number and shaft dimensions so MR Industrial Accessories LLC can assist with an equivalent.

To replace a sprocket or build a complete drive, send the part number PHS 25-1A18 or the number from your equipment via WhatsApp or email. MR Industrial Accessories LLC will provide a quote and help you confirm the tooth count and mounting. Inquiries about chains, pulleys, and other power transmission parts are also welcome.