SKF PHS 200-1C30 sprockets and gears
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Sprockets and gears
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHS 200-1C30 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHS 200-1C30 and any equivalents.
SKF PHS series sprockets are toothed wheels used in chain drives to transmit motion and torque between shafts. They are installed on shafts and engage with roller chains in industrial machinery. MR supplies this line for customers in the United States, Canada, Mexico and South America. If you need to replace a worn sprocket or build a new drive, send us the part number and we will quote.
The PHS designation identifies SKF sprockets for chain. The code after PHS indicates the chain pitch: for example, PHS 50-3C72 uses pitch 50, while PHS 60-2C68 uses pitch 60. The number after the hyphen shows the number of strands: 2 for double strand, 3 for triple strand. The letter C refers to the hub type, and the final number is the tooth count: 72, 76, 84, and so on. Thus, PHS 50-3C95 is a pitch 50, triple-strand sprocket with 95 teeth.
These sprockets are found in chain drives of conveyors, elevators, mills, mixers, and processing equipment in food, aggregate, and cement plants. They are also used in packaging lines and material handling systems. The PHS series covers various pitches and tooth counts to suit different ratios and torque requirements.
To select the correct sprocket, consider the chain pitch, number of strands, and tooth count. Also check the shaft diameter and mounting type (keyway, set screw, or hub). Proper installation requires aligning the sprockets and tensioning the chain per manufacturer guidelines. Regular lubrication and wear inspection help extend service life. For pulsating loads, verify the service factor.
SKF PHS sprockets can be interchanged with other brands that follow the same standards for pitch and tooth count. To find an equivalent, compare pitch, strands, teeth, and hub dimensions. If you have the original code, we can help identify the corresponding SKF reference.
To request a quote for an SKF PHS sprocket, send the complete code via WhatsApp or email to MR. If you don't have it, provide the chain and shaft data and we will help identify the part.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the code PHS 50-3C72 mean?
- PHS indicates an SKF sprocket for chain. The 50 is the chain pitch, the 3 is the number of strands, the C is the hub type, and the 72 is the number of teeth. With that data you can search for a replacement or request a quote from us.
- How do I choose the right sprocket for my drive?
- You need the chain pitch, number of strands, and tooth count, plus the shaft diameter and mounting type. With that data we can advise you so the sprocket meshes correctly and transmits torque reliably.
- Are SKF PHS sprockets interchangeable with other brands?
- Yes, if the pitch, number of strands, tooth count, and hub dimensions match. There is no universal code, but comparing those parameters helps find an equivalent. If you send us the original code, we can help identify it.