SKF PHS 16B-1TBH15 sprockets and gears
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Sprockets and gears
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHS 16B-1TBH15 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHS 16B-1TBH15 and any equivalents.
SKF PHS sprockets are designed for roller chain drives that follow the ANSI standard. They mount on shafts and engage the chain to transfer motion and power in many types of machinery. The part number itself tells you the chain pitch, the number of strands and the tooth count, so you can pinpoint the right sprocket for a given drive ratio. MR Industrial Accessories supplies this line within its power transmission range.
Reading the code is straightforward. PHS identifies the series. The number that follows gives the chain pitch in eighths of an inch, so 06 means 3/8" pitch and 10 means 5/8" pitch. The letter B signals single-strand chain. Then TBH plus a final number gives the tooth count. For example, PHS 06B-1TBH19 is a sprocket for ANSI 06B single-strand chain with 19 teeth, while PHS 10B-1TBH30 is for 10B pitch with 30 teeth. This structure makes identification quick.
These sprockets appear in chain drives on industrial, agricultural and transport equipment. Typical installations include conveyor belts, bucket elevators, machine tools, and machinery in the food, textile and wood sectors. They also show up in drive systems for pumps, compressors and fans. Their adaptability suits applications that need a consistent and dependable drive ratio.
When selecting a sprocket, check the chain pitch, the required number of teeth, the shaft diameter and the mounting type. Confirm that the bore and keyway fit the shaft. Lubrication matters: use the lubricant recommended for the speed and load. Keep the sprocket and chain properly aligned to prevent early wear. Sealing is not relevant for this component, but axial and radial play should be kept to a minimum.
For equivalents, SKF PHS sprockets can be replaced by other brands that follow the ANSI standard for roller chains. During replacement, compare pitch, tooth count, outside diameter and bore. Interchangeability across brands works as long as the standardized dimensions match.
To request a quote, send the full part number of the sprocket you need by WhatsApp or email to MR Industrial Accessories. If the designation is unclear, share a photo or the chain and shaft data, and we will help you identify it. Our team can also suggest equivalents and assist with the selection.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the designation PHS 06B-1TBH19 mean?
- PHS is the SKF sprocket series. 06B indicates ANSI 06B chain pitch (3/8"). 1TBH means one strand, and 19 is the number of teeth. So it is a sprocket for 3/8" pitch chain with 19 teeth.
- How do I choose the right sprocket for my machine?
- You need the chain pitch, the number of teeth required for the drive ratio, and the shaft dimensions (diameter and keyway). Also consider the available space and the lubrication and alignment conditions.
- Are SKF PHS sprockets compatible with other brands?
- Yes, because they follow the ANSI standard, they are interchangeable with sprockets from other manufacturers that respect the same standardized dimensions. Always verify pitch, number of teeth and diameters before replacing.