SKF PHS 16B-1DSA24 sprockets and gears
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Sprockets and gears
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHS 16B-1DSA24 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHS 16B-1DSA24 and any equivalents.
SKF PHS sprockets are designed for chain drives in industrial machinery, meshing with chains that match the pitch shown in the part number. They mount on shafts to transfer motion and torque between parallel axes. MR supplies this line as part of its power transmission range.
The part number system for these sprockets follows the pattern PHS …B-…DSA…. The PHS prefix identifies the sprocket family. The figure before B gives the chain pitch per ISO standards. The number after DSA is the tooth count: PHS 06B-1DSA15 has 15 teeth, while PHS 06B-1DSA22 has 22. The D indicates the hub or mounting style, and SA denotes a particular finish or treatment. Always check the full part number for compatibility.
Typical applications include conveyors, machine tools, packaging lines, and general drive mechanisms. They convert the rotary motion of a drive shaft into synchronized linear or rotational motion on the chain, maintaining the designed transmission ratio. They suit low to medium power drives in various industries.
When choosing a sprocket, match the chain pitch, tooth count, shaft diameter, and hub type. More teeth reduce speed and raise torque but enlarge the outer diameter. For installation, align the sprocket with the chain to prevent uneven wear, lubricate as needed, and inspect chain tension regularly. In dirty or wet environments, consider extra protection for the sprocket.
These sprockets interchange with other brands that follow the same pitch and tooth standard, provided the shaft diameter and hub type match. However, tolerances and surface treatments may differ, so verify compatibility before replacing. MR can advise on equivalents for your current part number.
To request a quote, send the complete part number via WhatsApp or email. MR responds with technical and commercial details and can help identify a replacement if you provide shaft and chain measurements.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the part number PHS 06B-1DSA15 mean?
- PHS indicates a chain sprocket; the number before B is the pitch per standard; 1DSA indicates the hub type and finish; and the final number is the tooth count. This part number identifies the exact sprocket needed.
- Are they compatible with chains from other brands?
- Yes, as long as the chain has the same standard pitch indicated by the part number and the tooth count matches. Still, check the shaft diameter and hub type to ensure correct mounting.
- How do I know how many teeth to choose?
- It depends on the required transmission ratio and available space. More teeth mean lower speed and higher torque, but also a larger diameter. Consult MR with your machine data for guidance.