SKF PHS 08B-1A16X40AG sprockets and gears
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Sprockets and gears
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHS 08B-1A16X40AG belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHS 08B-1A16X40AG and any equivalents.
The SKF PHS 08B-1A16X40AG is a single-strand sprocket built for 08B pitch chains, with 16 teeth and a 40 mm hub. It suits chain drives that link parallel shafts at a steady speed ratio. MR Industrial Accessories supplies this SKF sprocket line and helps you match the right wheel to your equipment.
Read the code in sections: PHS is the SKF sprocket line, 08B is the ISO chain pitch, 1 means a single strand, A is the hub type, 16 is the tooth count, 40 is the hub diameter in millimeters, and AG refers to the finish or surface treatment. Checking each block against your machine confirms the sprocket fits the chain and the shaft.
These PHS sprockets appear in low and medium speed drives: conveyor belts, chain elevators, food processing machines, packaging lines, and construction or agricultural equipment. The 08B chain has a narrow pitch and works at moderate power, which suits compact drives where noise should stay low.
Selection comes down to a few checks. Confirm the chain pitch matches the wheel, and that the tooth count gives the ratio you need. Look at the hub diameter and center bore; if the bore does not match your shaft, it has to be machined or a bushing used. Shaft alignment matters, since misalignment speeds up wear on both teeth and chain. Follow the duty cycle for lubrication and inspect chain tension on a regular schedule.
PHS sprockets interchange with other brands that share the same pitch and tooth count. When replacing one, compare the hub diameter and the fixing method, not just pitch and teeth. If your machine runs a sprocket from another brand, send the code and main dimensions and MR Industrial Accessories will help you find the equivalent.
Replacing a sprocket or building a new drive? Send the full code by WhatsApp or email and the team will reply with a quote. If the designation is unclear, share the chain pitch, tooth count and shaft dimensions, and they will guide you to the correct sprocket.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the code PHS 08B-1A16X40AG indicate?
- PHS is the SKF sprocket line, 08B is the ISO chain pitch, 1 is a single strand, A is the hub type, 16 is the number of teeth, 40 is the hub diameter in mm, and AG is the finish. Together they tell you whether the sprocket matches your chain and shaft.
- Can this sprocket run with a single-strand 08B chain?
- Yes. The code carries 08B and the digit 1, which correspond to an 08B pitch chain and one strand. Before mounting, confirm the chain pitch and width match the sprocket.
- How do I get a quote for an SKF sprocket?
- Send the full code by WhatsApp or email to MR Industrial Accessories. Without the code, send the chain pitch, number of teeth and shaft dimensions, and the team will help identify the sprocket you need.