SKF PHG T2.5-480-12 timing belt
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHG T2.5-480-12 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHG T2.5-480-12 and any equivalents.
For drives that require exact synchronization between shafts, SKF PHG T timing belts offer a dependable solution. Their toothed profile engages with matching pulleys to maintain a constant ratio without slipping. MR Industrial Accessories supplies this line as part of its power transmission range and provides technical guidance to help you select the correct belt.
The part number tells you the key dimensions. In a reference like PHG T2.5-230-6, PHG identifies the SKF timing belt family, T indicates the trapezoidal tooth shape, and 2.5 is the pitch in millimeters. The following number, 230, is the pitch length in millimeters, and the final figure, 6, is the width in millimeters. Reading the code this way lets you confirm size at a glance.
These belts appear in textile machinery, packaging and labeling lines, industrial printers, dosing equipment, and pick-and-place robots. They also serve in pump, fan, and low-power compressor drives, as well as in laboratory devices and food-industry equipment where cleanliness and precision matter. Any mechanism needing reliable shaft synchronization is a candidate.
Selecting the right belt starts with matching pitch, length, and width to your application. Check that the pulleys share the same pitch and have the appropriate tooth count. During installation, align the pulleys and set tension following the manufacturer's recommendations; too much tension can harm bearings, while too little may cause tooth jumping. Keep shaft bearings properly lubricated and inspect the belt regularly for wear or cracks.
Interchangeability is possible with other brands that use the same profile and pitch, provided all dimensions correspond. Always verify compatibility with your existing pulleys and review the technical data. MR Industrial Accessories supplies SKF and can help you find a suitable option for your equipment.
To request a quote, send the complete part number to MR Industrial Accessories via WhatsApp or email. The team responds promptly and can suggest equivalents or assist with choosing the right belt for your machine.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the code PHG T2.5-230-6 mean?
- PHG is the SKF timing belt family, T2.5 is the profile and pitch in millimeters (2.5 mm), 230 is the pitch length in millimeters, and 6 is the width in millimeters. This code helps you identify the main dimensions.
- Can I replace a belt from another brand with an SKF PHG T?
- Yes, if the profile, pitch, length, and width match. Timing belts are interchangeable between brands when they follow the same standardized dimensions. We recommend verifying compatibility with your pulleys and consulting us if you have any doubt.
- How should I install and tension a PHG T timing belt?
- Align the pulleys so they are parallel and centered. Tension the belt according to the manufacturer's instructions: excessive tension can damage the bearings and insufficient tension can cause tooth jumping. Periodically check wear and tension.