SKF PHG DB-T10-1350-16 polyurethane belt

SKF PHG DB-T10-1350-16 belongs to polyurethane belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHG DB-T10-1350-16 and any equivalents.

For drives that must stay in sync without slipping, SKF PHG DB-T belts offer a double-toothed polyurethane construction reinforced with steel cords. They mesh with timing pulleys to maintain exact speed ratios, even in compact spaces and at elevated speeds. The T5 and T10 profiles cover many precision applications where abrasion resistance matters, such as food processing, textile machinery, and packaging lines.

Reading the belt code helps you order the right replacement. PHG DB signals the double-toothed polyurethane family. The profile follows, such as T5 or T10, where T10 means a 10 mm pitch. Next is the length in millimeters, and the final number is the width in millimeters. For example, PHG DB-T5-550-10 is a T5 belt, 550 mm long, 10 mm wide. Common widths include 6, 8, 10, 12, 16, 20, and 25 mm.

These belts suit drives that cannot tolerate slip and must hold a fixed speed ratio. You will find them in food industry equipment, packaging and labeling machines, textile lines, industrial printers, and positioning systems. Polyurethane handles washdowns and certain lubricants well, which makes it a practical choice for clean environments. Linear motion setups and compact machines also benefit, especially where a chain would add weight or noise.

Selection starts with matching the profile and pitch to your timing pulley. Width depends on the power to transmit and the space available. Because the belt is toothed on both sides, it can run over reverse pulleys. Check pulley alignment and tension during installation; incorrect tension speeds up wear. No lubrication is needed, but keeping the area clean helps. Polyurethane resists oils and greases reasonably well, though you should confirm chemical compatibility for your specific exposure.

Belts with T5 or T10 profile can be swapped between brands when pitch, profile, and width are identical. A similar length alone is not enough; the pitch must match exactly for proper meshing. When you request a quote, share the full code from the original belt or the equipment manual. If that code is missing, we can help identify the belt from a sample or by measuring pitch and width. MR supplies the SKF line and can suggest suitable equivalents.

To get a quote, send the belt code by WhatsApp or email. If you are unsure, include a photo of the belt and the pulley dimensions. Our team responds promptly and can point you to the right option in the SKF line or an equivalent.