SKF PHG DA-T10-1500-16 timing belt

SKF PHG DA-T10-1500-16 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHG DA-T10-1500-16 and any equivalents.

The SKF PHG DA-T timing belt is a synchronous drive belt that meshes with timing pulleys to keep shafts turning in step. It is used wherever motion needs to be accurate and the speed ratio must stay constant, such as in automation, printing, packaging and textile equipment. MR Industrial Accessories supplies this line and can assist with sizing.

The code tells you the main dimensions. PHG is the SKF timing belt family, DA refers to the metric tooth profile and T is the metric pitch series. In PHG DA-T5-815-18, the 5 is the pitch in millimeters, 815 is the pitch length in millimeters and 18 is the width in millimeters. In PHG DA-T10-1500-16, the pitch is 10 mm, the length 1500 mm and the width 16 mm. Reading the code this way makes it easy to identify any size in the line.

These belts suit machines that need repeatable, synchronized motion. You will find them in packaging lines, industrial printers, cutting and engraving tables, pick-and-place units and stepper motor drives. They also appear in textile, ceramic and food processing equipment, where cleanliness and precision matter. Because they run without lubrication, they fit areas where oil would be a problem. The metric profile is common on European-built machinery and on many automation builds.

When choosing a timing belt, match the pitch, length and width to your pulley. The tooth profile must be the same: a T5 belt will not mesh with a T10 pulley. Align the pulleys to prevent uneven wear and noise. Set tension according to the machine manufacturer's recommendation; too tight and bearing wear increases, too loose and the belt can jump teeth. No lubrication is needed, but keep the belt clean and away from oils and harsh chemicals.

Metric T5 and T10 belts are often interchangeable between brands that meet ISO 13050 or an equivalent standard. However, profiles and tolerances can differ slightly, so always check compatibility with the pulley. For a replacement, the most reliable reference is the full part number printed on the belt. MR Industrial Accessories can help you identify a correct equivalent: send a photo or the part number and we will verify it.

To request a quote for your SKF PHG DA-T timing belt, send the complete part number to MR Industrial Accessories by WhatsApp or email. If you do not have it, provide the pitch, length and width, plus the number of teeth on the pulley. With that information we can advise you so you receive the right belt. We also assist with selection and mounting.