SKF PHG DA-710-5M-25 timing belt
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHG DA-710-5M-25 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHG DA-710-5M-25 and any equivalents.
SKF PHG DA timing belts are synchronous drive components that mesh with toothed pulleys to keep shafts turning together without slip. When rotational accuracy matters, they provide a clean alternative to chain or gear drives. MR Industrial Accessories LLC supplies this line as part of its power transmission range for customers in the United States and Latin America.
The part number tells you the three key dimensions. PHG DA identifies the SKF belt family. The first figure is the pitch length in millimeters. The letter M signals a metric pitch, such as 5M or 8M. The final figure is the width in millimeters. For example, PHG DA-565-5M-9 runs 565 mm long and 9 mm wide, while PHG DA-600-8M-30 pairs an 8M pitch with a 30 mm width. Confirm all three values before ordering.
These belts are found in food processing, textile, ceramics, woodworking and automation equipment where shaft synchronization is required. Machine tools, industrial printers, packaging lines and positioning systems also use them. They suit compact drives that need to run with little maintenance attention.
Selection starts with the pitch, pitch length and width, and these must match the pulleys. During installation, align the pulleys and set tension according to the manufacturer's guidance; too much tension speeds up wear on the teeth and on bearings. The belts run dry, so keep them away from oils, greases and extreme temperatures. Check tooth condition and pulley surfaces at regular intervals.
For replacements, SKF PHG DA belts can be exchanged with other brands that share the same pitch, length and width, including 5M or 8M series from different makers. Verify that the tooth profile and tolerances work with your pulleys.
To replace a timing belt, send the complete part number to MR Industrial Accessories LLC by WhatsApp or email. Our team can identify the exact size and suggest suitable options for your equipment.
Dimensions
- Perfil
- 5M
- Type
- Doble dentado
Frequently asked questions
- What does the code PHG DA-565-5M-9 mean?
- It identifies an SKF timing belt from the PHG DA line with a 565 mm pitch length, a 5M profile (5 mm metric pitch) and a 9 mm width. These measurements must match your pulleys for proper meshing.
- How do I choose the belt width?
- The width must match the pulley width. If you need to transmit more torque, you can choose a greater width, but confirm that the pulleys accept that size. Contact us with your pulley code if you are unsure.
- Do timing belts need lubrication?
- No, timing belts run dry. Avoid contact with oils, greases or solvents that could damage the elastomer. Keep the pulleys clean and aligned to help extend service life.