SKF PHG DA-1200-5M-S180 timing belt

SKF PHG DA-1200-5M-S180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHG DA-1200-5M-S180 and any equivalents.

SKF PHG DA timing belts are toothed belts that engage pulleys of matching pitch to transmit synchronized motion without slipping. They suit drives where the ratio must stay exact and speeds are moderate to high. MR Industrial Accessories supplies this line to maintenance and purchasing teams across the United States and Latin America.

The code PHG DA-…M-S… breaks down into four parts. PHG DA names the toothed-profile family. The middle figure, such as 575, 850 or 1080, is the pitch length in millimeters. The number before the M, for example 5M or 8M, sets the pitch at 5 mm or 8 mm. The S suffix with a number, like S180 or S190, gives the width in hundredths of an inch. So PHG DA-640-8M-S180 means 8M pitch, 640 mm length and 1.80" width.

These belts fit drives where slipping is not acceptable: machine tool spindles, camshafts, vacuum pumps, compressors, packaging equipment and assembly lines. They also appear on mixers, agitators and light conveyors that call for synchronism and low maintenance. You will find them in metalworking, food, plastics, ceramic and automotive operations, both on new machines and as replacements on imported equipment.

Selection starts with the pulley: confirm the pitch and tooth count so the profile matches. Choose pitch length from the center distance and the adjustment available. Width follows the torque to be transmitted and the pulley diameter. At installation, align the pulleys with a straightedge or laser, never force the belt with tools, and set tension per the equipment manual. Too little tension lets teeth jump; too much loads bearings and shafts.

SKF timing belts interchange with other brands that use the same pitch and length nomenclature, such as 5M, 8M or 14M. What matters is keeping pitch, pitch length and width consistent. An equivalent from another brand works when those three variables are respected.

To request a quote, send the complete belt code by WhatsApp or email to MR Industrial Accessories. If you do not have it, send the pitch, pitch length and width, or a photo of the old belt next to a ruler. Our team confirms the equivalent and helps you choose the option that fits your equipment.