SKF PHG CX47EP timing belt
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHG CX47EP belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHG CX47EP and any equivalents.
SKF PHG CX…EP timing belts are toothed belts that engage with pulleys of matching pitch to maintain a constant speed ratio without slipping. They are chosen for applications where shaft synchronization is essential, such as motors, pumps, and positioning systems. MR Industrial Accessories supplies this line.
The code PHG CX…EP breaks down as follows: PHG denotes the SKF timing belt family, CX specifies the tooth profile and pitch, and the number that follows indicates the tooth count or a coded pitch length. The EP suffix points to a particular compound or construction variant. For instance, PHG CX37EP and PHG CX39EP are two different lengths within the same series. When selecting, match the complete code against your original belt, or measure the pitch and width.
These belts appear in food processing, textile, packaging, and automation settings that demand synchronization and minimal upkeep. They also serve in compressors, machine tools, and general power transmission equipment. In Latin American production lines, they often replace V-belts in critical drives that require exact ratios and steady speeds.
Correct selection starts with confirming the pulley profile and pitch, the number of teeth, and the belt width. During installation, align the pulleys and set tension to specification: too much tension harms the teeth and bearings; too little allows the belt to jump teeth. Inspect pulleys and replace the belt if you find wear, cracks, or tension loss. The belt itself needs no lubrication, but the pulley bearings do.
For cross-referencing, timing belts are defined by profile, pitch, and length; products from different brands can be interchangeable when those parameters align. Do not trust the code alone—compare actual dimensions. SKF is a brand that MR carries, and we can help you find a belt equivalent to the one you use.
To replace an SKF PHG CX…EP timing belt, send the full code or measurements of the original belt via WhatsApp. At MR Industrial Accessories, we guide you to request the correct reference and avoid machine downtime. We can also quote other equivalent brands if your application permits.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I identify the timing belt I need?
- Check the code printed on the back of the old belt. If it is unreadable, measure the pitch between teeth, the width, and the pitch length. With those details, we can find the matching SKF PHG CX…EP reference.
- What does the EP suffix mean on these belts?
- The EP suffix indicates a compound or construction variant within the SKF line. It does not alter the profile or pitch, but it can affect strength and service behavior. Contact us if you have questions about your application.
- Can I replace a belt from another brand with an SKF one?
- Yes, provided the profile, pitch, number of teeth, and width are the same. Timing belts are interchangeable between brands when those parameters match. Always verify the actual dimensions before installing to prevent failures.