SKF PHG B80X3 v-belt
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHG B80X3 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHG B80X3 and any equivalents.
For plants that run B-section drives, the SKF PHG B V-belt line covers a broad range of lengths and multi-rib builds. These belts sit in grooved pulleys to connect shafts and carry motion, and their classic profile fits many types of industrial equipment. MR Industrial Accessories supplies this series and helps you match the belt to the drive.
Reading the part number is the fastest way to confirm what you need. The PHG prefix and B section are followed by a number that gives the datum length in inches; for instance, PHG B22.5 is a B-section belt measuring 22.5 inches. Suffixes like B100 or B101 point to particular lengths in the series. When the belt is multi-rib, an X and a second number appear, as in PHG B100X12, where 12 is the rib count. With the full code in hand, you can pick the correct belt for each drive.
B-section belts turn up in compressors, pumps, fans, mills and conveyors, among other equipment. They suit medium power and moderate speed drives, which is why they appear in food, metallurgical, textile and agricultural operations. MR Industrial Accessories offers them for replacement jobs and new projects, and can advise on sizing when the original belt is worn or missing.
Selection comes down to the pulley section, the datum length required and how the drive runs. Aligned pulleys in good condition help prevent early wear. Tension matters too: a loose belt slips, while an overly tight one puts extra load on the bearings. In oily or dusty areas, guards are worth considering. The belt itself needs no lubrication, but the shaft bearings still require their normal maintenance.
SKF PHG B belts can be interchanged with other brands that use the same standardized section and length designation. For a quote, provide the complete part number so the equivalent can be confirmed. On multi-rib drives, check both the rib count and the overall length. If anything is unclear, the MR team can identify the right belt from the pulley or the application details. Send the part number by WhatsApp or email and we will reply promptly, suggest equivalents and help you choose.
Dimensions
- Section
- B
- Type
- Clásica
- Canales (multicanal)
- 3
Frequently asked questions
- How do I identify the length of a PHG B belt?
- The number after the B gives the datum length in inches. For example, PHG B100 is 100 inches. In a multi-rib belt such as PHG B100X12, the 12 is the number of ribs. Always check the complete part number on the original belt.
- What does classic type mean?
- Classic type refers to a V-belt profile of standard construction with standardized dimensions. It fits B-section pulleys and is used in conventional drives. It should not be confused with high-capacity or toothed profiles, which have different performance characteristics.
- Can I replace a belt from another brand with an SKF PHG B?
- Yes, as long as the section, datum length and type match. Standardized belts allow interchangeability between brands. To be sure, send us the part number of the original belt and we will confirm the equivalence with the SKF PHG B line.