SKF PHG 860-H-S1800 timing belt
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHG 860-H-S1800 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHG 860-H-S1800 and any equivalents.
SKF PHG H timing belts are built for drives that need exact synchronization. The teeth on the inside of the belt engage the grooves of a matching pulley, so the ratio stays constant and slip is not a factor. You will find them in textile, food, packaging and automation equipment where motion accuracy matters.
Reading the code is the fastest way to confirm you are ordering the right belt. Take PHG 145-H-S1800: PHG is the SKF line, 145 is the pitch in tenths of an inch (14.5"), H is the tooth profile, and S1800 is the pitch length in hundredths of an inch (18.00"). The number after the H always gives the length, while suffixes can change with width and other characteristics.
These belts show up in textile machinery, packaging and labeling lines, industrial printers, light conveying and machine tools. Pumps, compressors and automation equipment also use them when a quiet, synchronized drive is needed. Multiple-shaft layouts and applications where the relative position of components must hold are a good fit.
When selecting a belt, check four things: profile (H here), pitch, pitch length and width. The pulley must share the same profile and pitch. At mounting, align the pulleys and set tension correctly. Too much tension wears the teeth and bearings faster; too little lets teeth jump. No lubrication is needed, but keep the belt clean and away from contaminants.
SKF PHG H belts interchange with other brands that use the same profile and pitch designation. A PHG 145-H-S1800 can replace any H-profile belt with 14.5" pitch and 18.00" pitch length from another maker, provided tolerances are respected. Send the full code from the original belt when you request a quote, and we will confirm the equivalent.
MR Industrial Accessories LLC supplies SKF timing belts within our power transmission range. Send the complete PHG code by WhatsApp or email and our team will reply promptly with a quote. We can also point you to the right pulley and mounting accessories.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does PHG 145-H-S1800 tell me?
- PHG is the SKF timing belt line. The 145 is the pitch in tenths of an inch. H is the tooth profile. S1800 is the pitch length in hundredths of an inch.
- How do I check that an SKF PHG H belt fits my pulley?
- The pulley needs the same H profile and the same pitch. Confirm the pitch length against the center distance and the pulley tooth count. If anything is unclear, send us the code from the belt you are replacing.
- Does a timing belt need lubrication?
- No. Keep it clean and avoid contact with oils or greases that could degrade the material. Correct tension and aligned pulleys help it last.