SKF PHG 700-XH-200 timing belt
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHG 700-XH-200 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHG 700-XH-200 and any equivalents.
SKF PHG XH timing belts are toothed power transmission belts that engage with matching pulleys to maintain a constant speed ratio without slipping. They are specified where shaft synchronization is essential, such as machine tools, bottling lines, and positioning systems. MR Industrial Accessories supplies this SKF line and helps you identify the correct belt for your drive.
The part number tells you the main dimensions. PHG denotes the high-performance line. The first number is the pitch length in tenths of an inch. XH is the tooth profile with a 7/8 inch pitch. The final number is the width in hundredths of an inch. For example, PHG 560-XH-200 has a pitch length of 560 tenths of an inch and a width of 2 inches. Other combinations in the series include PHG 700-XH-400 and PHG 980-XH-300.
These belts appear in food, textile, ceramic, and metallurgical plants, wherever equipment must stay in step: positive displacement pumps, compressors, CNC machine spindles, precision conveyors, and mixers. Packaging lines, cutting saws, and woodworking machines also rely on them. The XH profile handles high torque in tight spaces when the pulley is compatible and tension is correct.
For selection, confirm the pulley tooth count, the required pitch length, and a width that carries the load. During installation, align the pulleys accurately to prevent side wear and noise. Set tension according to the machine builder's recommendation. Too much tension loads the bearings; too little lets teeth jump. These belts run dry and must stay free of oil, dust, and chips that speed up wear.
Timing belts are identified by profile and pitch, so an XH belt from another maker with the same pitch length and width may interchange. Always compare the full designation and check dimensional tolerances and construction, because dimensions can differ between brands. MR Industrial Accessories can review compatibility with your existing equipment.
To replace an SKF PHG XH timing belt, send the complete code by WhatsApp or email. The team replies promptly, helps you confirm the exact size, suggests equivalents, and assists with choosing the right belt for your transmission.
Dimensions
- Perfil
- XH
Frequently asked questions
- What does the code PHG 560-XH-200 mean?
- PHG is the high-performance line, 560 is the pitch length in tenths of an inch, XH is the tooth profile with 7/8 inch pitch, and 200 is the width in hundredths of an inch (2 inches). Use these values to check compatibility with your pulley.
- Can these belts run on pulleys from other brands?
- Yes, if the profile and pitch match. Timing belts are standardized, so interchange between manufacturers is possible, but verify tolerances and pulley condition. Send us the belt and pulley codes for advice.
- How are SKF PHG XH timing belts maintained?
- They need no lubrication. Keep them clean and free of oil and dust, and check tension and pulley alignment periodically. Excessive tension wears bearings; low tension can cause tooth jumping.