SKF PHF J-3-15/16 taper bushings and components
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Taper bushings and components
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHF J-3-15/16 belongs to taper bushings and components, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHF J-3-15/16 and any equivalents.
Taper bushings in the SKF PHF J line lock pulleys, gears, couplings and similar components onto cylindrical shafts. The tapered shape lets you tighten the bushing with screws for a firm grip, and it comes apart just as easily without harming the shaft surface. MR Industrial Accessories supplies this line as part of its power transmission range.
The size is written into the code: after PHF J comes the nominal shaft diameter in inches, fractions included. So PHF J-1-1/2 fits a 1 1/2 inch shaft, and PHF J-2 fits a 2 inch shaft. Fractional options such as 1-3/4, 1-5/8, 1-7/8, 1-15/16, 2-1/4 and 2-1/2 cover the usual commercial shaft sizes. Measure the shaft before you order.
You will find these bushings on belt drive pulleys, gear connections, flywheels and sprockets. They show up in production lines, conveying equipment, mills, mixers and agricultural machinery, where being able to swap a bushing quickly matters.
Selection comes down to shaft diameter, torque to be transmitted and load type. To mount one, slide the bushing into the hub of the part being secured and tighten the screws in even, progressive steps. Clean the tapered surfaces first and apply the manufacturer's recommended torque. Lubrication and alignment keep wear down and operation safe.
Bushings that share the same taper and dimensional standard can often be replaced across brands, though not every brand matches. Compare taper dimensions, shaft diameter and bushing length to confirm an equivalent. Our team can help if you are unsure.
To get a quote, send the full part number by WhatsApp or email. We help you pick the right size and point out alternatives.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I choose the right SKF taper bushing for my shaft?
- Measure the shaft diameter in inches and match it to the PHF J part number. A 1 1/2 inch shaft takes PHF J-1-1/2. Also confirm the torque and the hub dimensions where it will be mounted.
- Are SKF taper bushings compatible with other brands?
- Standardized taper bushings can generally be interchanged between brands that follow the same taper standard. Compare the exact taper and shaft dimensions before replacing one with another.
- What care does mounting a taper bushing require?
- Clean the tapered surfaces, check for burrs and tighten the screws evenly and progressively. Apply the manufacturer's recommended torque and make sure the shaft and hub are aligned.