SKF PHF FX41-35X60 taper bushings and components
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Taper bushings and components
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHF FX41-35X60 belongs to taper bushings and components, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHF FX41-35X60 and any equivalents.
Taper bushings in the SKF PHF FX line are used to seat bearings with tapered bores onto plain cylindrical shafts. Because the bushing carries the taper, the shaft itself needs no machining, and the assembly stays centered and firmly clamped once the axial force is applied. Industrial machinery, transmission equipment and bearing arrangements that call for precision fit are the usual places these parts show up.
Reading the code is the fastest way to confirm you have the right bushing. PHF FX is the SKF family name, and the block that follows, for instance FX10, tells you the type and series. Dimensions come next as bore x outside diameter in millimeters, so a PHF FX10-20X47 bushing has a 20 mm bore and a 47 mm outside diameter. Suffixes may point to design variants, including lock nuts or lock washers. Once you know the pattern, matching a bushing to a drawing or an existing assembly takes only a moment.
These bushings appear in gearboxes, pumps, fans, conveyor belts and machine tools, and in sectors such as food processing, mining, cement and metallurgy. Their job is to mount a tapered-bore bearing on a cylindrical shaft and hold it true. During mounting, the bushing also lets you set the bearing internal clearance, which is one reason maintenance teams keep them on hand for rebuilds.
Selection starts with the shaft diameter, the bearing type and the operating conditions. Check concentricity and the fit between bushing and bearing before you install anything. Lubricate the tapered surfaces, then apply axial force with the specified lock nut or mounting tool. Skip that step or overtighten and you risk eccentricity or bearing damage, so follow the manufacturer's instructions and verify radial clearance once the assembly is seated.
Equivalent bushings from other recognized brands can be used in place of SKF PHF FX parts when dimensions and cone angle line up. Compare load capacity and mounting method as well, not just the measurements. For a quote, send the complete part number through WhatsApp or email; our team replies promptly and can suggest equivalents or help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does PHF FX10-20X47 tell me?
- PHF FX10 is the SKF taper bushing type, while 20X47 gives the bore at 20 mm and the outside diameter at 47 mm. The code lets you identify the main dimensions at a glance.
- What is the mounting procedure for an SKF PHF FX taper bushing?
- Clean and lubricate the tapered surfaces, slide the bushing onto the shaft, then fit the bearing. Apply axial force with the mounting nut until you reach the recommended radial clearance, following the manufacturer's instructions.
- Can SKF PHF FX bushings replace bushings from other brands?
- They can be interchanged with bushings from other brands when dimensions, cone angle and load capacity match. Confirm the complete part number with our technical team before ordering.