SKF PHF E-2-13/16 taper bushings and components
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Taper bushings and components
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHF E-2-13/16 belongs to taper bushings and components, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHF E-2-13/16 and any equivalents.
The PHF E line from SKF covers taper bushings, the components that lock pulleys, gears, couplings and similar transmission parts onto cylindrical shafts. Because the fit is tapered, the bushing centers itself on the shaft, so mounting and removal go faster and no special shaft machining is needed. It is a straightforward way to carry torque through a drive system.
Reading the code is the quickest route to the right bushing. The number that follows PHF E gives the nominal shaft size in inches: PHF E-1 fits a 1-inch shaft, PHF E-1-1/2 fits a 1 1/2-inch shaft. Fractional suffixes such as -1/4, -1/8 or -3/16 cover the intermediate shaft sizes, so matching a measured shaft to a part number takes only a moment.
You will find these bushings wherever a shaft has to drive another element: pulleys on belt drives, gears inside gearboxes, couplings on pumps and fans. Food processing, textile and mining operations rely on them, as does general manufacturing, because the connection they create is dependable and simple to service.
Selection comes down to two checks: the shaft diameter and the hub dimensions of the part being mounted. The taper centers the assembly and spreads the load evenly. At assembly, wipe the mating surfaces clean, then tighten the fastening screws to the specified torque. Keep an eye on lubrication and sealing so dirt and moisture stay out and wear does not set in early.
On equivalences, PHF E bushings from SKF can be swapped with bushings of other makes that share the same dimensional standard. Confirm the taper angle and tolerances before making a substitution, since interchangeability only holds when those standardized dimensions line up. A specialist can settle the question if anything is unclear.
To get a quote, send the complete part number for the SKF PHF E bushing you need by WhatsApp or email. The team replies promptly, points you to the right size and can suggest equivalents when required.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I pick the SKF PHF E taper bushing for my shaft?
- Take the shaft diameter in inches and match it to the part number for that size, for example PHF E-1 for a 1-inch shaft. If the measurement is unclear, send it to us by WhatsApp and we will confirm the size.
- Can SKF PHF E bushings replace bushings from other manufacturers?
- They may interchange with bushings of other brands built to the same dimensional standard. Check the taper angle and tolerances first. Our technical team can help if you have doubts.
- What does installing a taper bushing involve?
- Clean the shaft and hub, tighten the screws to the recommended torque and verify alignment. Correct lubrication and sealing help the assembly last. Follow the manufacturer's instructions for safe mounting.