SKF PHC 80H-1C-C/L roller chain
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Roller chains
- Size
- ASA 80
- Series
- PHC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHC 80H-1C-C/L belongs to roller chain, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHC 80H-1C-C/L and any equivalents.
SKF PHC Series H is a high-pitch roller chain built for power transmission where loads are heavy and speeds stay moderate. It links toothed shafts so motion is transmitted in sync across industrial machinery. The taller plate profile of the H version suits demanding duty where the chain has to keep performing in dusty, damp or warm surroundings.
Reading the code helps you order the right chain. After PHC, the first number gives pitch in eighths of an inch: 50 is 5/8 in, 60 is 3/4 in, 80 is 1 in and 100 is 1-1/4 in. The H marks the high-pitch version, whose plates are taller than the standard design. The digit after the hyphen tells you the strand count: 1 single, 2 double, 3 triple. The closing C/L letters describe the joint, either clip or rivet. With that breakdown you can confirm pitch, strands and termination before requesting a quote.
Typical installations include belt conveyors, bucket elevators, food processing lines, packaging machines, flour mill and cement plant drives, and metallurgical equipment. Agricultural machinery such as combine harvesters and seeders also uses them, as do woodworking operations and aggregate processing plants.
Selection starts with the power to transmit, the rotation speed, the number of sprocket teeth and the center distance. During installation, align the sprockets carefully to limit wear and noise. Lubrication choice follows speed and load: dense oil or grease at low speed and high load, fluid oil at higher speed. Check tension and play, inspect seals in contaminated areas, and clean and measure elongation at intervals.
High-pitch roller chains follow international standards, so a chain from one maker can generally replace another when pitch, strand count and termination match. Tolerances and materials can still differ, so confirm fit with the sprockets already on the machine. MR Industrial Accessories supplies the SKF line and can suggest equivalents.
To get a quote, send the complete part number by WhatsApp or email, for example PHC 60H-2C-C/L. Our team replies promptly and can assist with choosing the correct chain for your equipment.
Dimensions
- Standard
- ASA / ANSI
- Rows
- Single
- Series
- Heavy (H)
- Packaging
- Unión (eslabón de conexión)
Frequently asked questions
- What does the H indicate in PHC 60H-1C-C/L?
- The H means high-pitch: the plates are taller than the standard version, which suits heavier loads and tougher duty. The 60 stands for a 3/4 inch pitch.
- How do I decide between single, double and triple strand chain?
- It comes down to the power you need to transmit and the space available. More strands raise load capacity but also increase width, so check that your sprockets accept the strand count you pick.
- What lubrication should an SKF PHC roller chain use?
- It depends on speed and load. Low speed with high load calls for dense oil or grease, while higher speeds are better served by fluid oil. Good lubrication cuts wear and helps the chain last.