SKF PHC 40-1X30MTR-AG roller chain
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Roller chains
- Size
- ASA 40
- Series
- PHC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHC 40-1X30MTR-AG belongs to roller chain, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHC 40-1X30MTR-AG and any equivalents.
SKF PHC MTR-AG roller chains are power transmission components used to connect sprockets and transfer motion in many types of machinery. The series is supplied in 30-meter rolls and can be ordered in single, double or triple strand versions, so you can match different load requirements and transmission ratios. MR Industrial Accessories supplies this line as part of its power transmission range.
The part number tells you the main specifications. Take PHC 40-1X30MTR-AG: pitch 40, one strand, 30-meter roll. PHC 50-2X30MTR-AG: pitch 50, two strands, same roll length. The letters PHC identify the SKF roller chain family, while AG marks a variant within the series. Pitch numbers such as 40, 50, 60 and 80 follow standardized sizes and give an indication of strength and actual pitch.
These chains are found in chain drives on agricultural equipment, conveyors, packaging machines, mixers, elevators and plant transmission systems. They handle dusty, vibrating and variable-load conditions well. When choosing a chain, consider the power to be transmitted, speed, center distance and the lubrication method available.
During installation, check sprocket alignment and set the correct chain tension. Good lubrication lowers wear and helps the chain last longer; in dirty environments, automatic lubrication or sealed versions may be needed. Axial and radial play should stay within the manufacturer's tolerances. If shock loads are present, a higher strand count may be the better choice. Clean the chain periodically and inspect for elongation.
Roller chains are made to international standards, so different brands can often be interchanged when pitch, strand count and roller type match. Performance is not identical across all manufacturers, though. To replace an existing chain, note the complete part number and speak with a specialist. MR Industrial Accessories can advise on compatibility with other brands.
To request a quote for SKF PHC MTR-AG roller chains, send the full part number by WhatsApp to MR Industrial Accessories. We will provide the technical and commercial information you need, and we can also help you select the right chain for your application.
Dimensions
- Standard
- ASA / ANSI
- Rows
- Single
- Packaging
- Rollo de 30 m
Frequently asked questions
- What does the AG suffix mean in SKF PHC chains?
- The AG suffix indicates a variant within the PHC series. It may refer to a surface treatment, a lubrication type or a specific design detail. Check the product data sheet or contact us on WhatsApp for the exact meaning.
- Can I replace a chain from another brand with an SKF PHC chain?
- Usually yes, as long as pitch, strand count and roller type are the same. Roller chains are manufactured to standards that support interchangeability, but verify the critical dimensions and consult a specialist before ordering.
- What lubrication do you recommend for these chains?
- It depends on speed, load and operating environment. For standard applications, mineral or synthetic oil works well. In dusty or humid conditions, adhesive lubricants or automatic systems may be necessary. Follow the manufacturer's recommendations.