SKF PHC 16B-1NP-C/L roller chain
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Roller chains
- Series
- PHC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHC 16B-1NP-C/L belongs to roller chain, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHC 16B-1NP-C/L and any equivalents.
SKF PHC roller chains connect parallel shafts through sprockets to transmit power in a synchronized way. They are built for high loads and moderate speeds, and MR Industrial Accessories LLC supplies this line with support to match the chain to your drive.
The part number tells you what you are ordering. The PHC prefix marks the SKF roller chain line. The pitch number that follows (04B, 05B, 06B, 08B, for instance) sets the size under ISO 606: a larger number means a larger pitch and more load capacity. The -1 or -2 suffix shows single or double strand. NP means the plates have no extra surface treatment, and C/L covers lubrication and finish. So PHC 06B-1NP-C/L is a 06B pitch chain, single strand, standard plates, factory lubricated.
You will find these chains on machine tool drives, conveying equipment, packaging systems, and in food, textile and agricultural operations. Mills, conveyor belts, mixers and low to medium speed drives are common homes for them. The construction handles dust, humidity and moderate temperatures when the correct lubricant is used and maintenance is kept up.
Selection starts with the power to transmit, shaft speed, transmission ratio and load type. Check sprocket alignment and tension to avoid early wear. Lubrication matters: normal applications usually take good quality oil or grease, while corrosive or food environments may call for special lubricants. Chains are not sealed, so keep contaminants away. Follow the manufacturer's installation instructions for reliable operation.
SKF PHC chains meet ISO 606, so you can interchange them with chains from other makers that follow the same standard and share the pitch and configuration (single, double, and so on). Materials and treatments can differ between manufacturers, so confirm fit with the sprockets already on the machine. MR Industrial Accessories LLC supplies this brand and can help you choose.
To get a quote for an SKF PHC roller chain, send the full part number to MR Industrial Accessories LLC by WhatsApp or email. We reply promptly and can suggest equivalents or help you confirm the designation fits your application.
Dimensions
- Standard
- BS / ISO 606
- Rows
- Single
- Finish
- Niquelada (NP)
- Packaging
- Unión (eslabón de conexión)
Frequently asked questions
- What does the NP suffix mean in PHC chains?
- NP means the plates are standard, with no additional surface treatment. This fits applications where extra corrosion resistance is not needed.
- Can I replace a chain from another brand with an SKF PHC?
- Yes, if both follow ISO 606 and have the same pitch and configuration (single, double, etc.). Check the sprockets and ask us about compatibility.
- What lubrication do you recommend for PHC chains?
- It depends on the application. Normal conditions call for good quality oil or grease. Corrosive or food environments may need special lubricants. Follow the manufacturer's recommendations and keep a lubrication routine.