SKF PHC 100H-1X10FT-AG roller chain
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Roller chains
- Size
- ASA 100
- Series
- PHC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PHC 100H-1X10FT-AG belongs to roller chain, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHC 100H-1X10FT-AG and any equivalents.
A roller chain from the SKF PHC Series H range is built for power transmission duties where loads are high and speeds stay moderate. It links toothed shafts and carries motion synchronously at high mechanical efficiency, which makes it a solid pick for industrial drives that have to keep running under demanding conditions.
Reading the code helps you order the right item. The leading figure (50, 60, 80 and so on) is the pitch expressed in eighths of an inch per the ANSI standard. The H tells you the chain is double-pitch, heavy duty, with thicker plates and greater strength. A suffix such as -1X10FT means one strand, 10 feet long, while AG marks an anti-corrosion surface treatment. So PHC 80H-1X10FT-AG is a chain of 80H pitch, single-strand, 10 feet, with anti-corrosion protection.
You will find these chains across food, cement, mining, petrochemical and general manufacturing plants. Typical duty points include conveyors, elevators, mill drives, mixers, pumps and compressors. The heavy construction suits sites with dust, humidity or moderate temperatures, where positive transmission and predictable maintenance matter more than speed.
Selection starts with the power to be transmitted, the shaft speed, the center distance and the working environment. Check sprocket alignment and tension before anything else, since both drive premature wear. Apply the lubricant the manufacturer specifies for your speed and load, and keep contaminants out with suitable sealing and protection. At assembly, confirm the sprockets line up and that the chain is not over-tensioned.
On interchangeability: because SKF PHC Series H chains follow the ANSI standard, they can stand in for other brands using the same standard and designation. Confirm pitch, number of strands and required length first. Two chains with the same designation are not automatically equal in service, since surface treatment and steel quality both play a role, so review the technical specifications before you swap one out.
Send the full code for the SKF PHC Series H chain you need to MR Industrial Accessories by WhatsApp or email to request a quote. The team replies promptly, can suggest equivalents and helps you match the chain to your application.
Dimensions
- Standard
- ASA / ANSI
- Rows
- Single
- Series
- Heavy (H)
- Packaging
- Rollo de 10 pies
Frequently asked questions
- What does the -AG suffix mean on the PHC chain?
- It signals an anti-corrosion surface treatment. That treatment guards the chain against oxidation where humidity or corrosive agents are present, which helps it last longer in demanding service.
- Can I replace a chain from another brand with an SKF PHC Series H?
- Yes, provided both follow the ANSI standard and agree on pitch, number of strands and length. Check the surface treatment and the load conditions as well, so performance stays equivalent.
- How should I lubricate an SKF PHC roller chain?
- It depends on speed and load. As a rule, use a high-quality oil or grease applied at regular intervals, follow the manufacturer's guidance and keep the chain clean so wear does not set in early.