SKF PHC 08B-1HPSS-C/L roller chain

SKF PHC 08B-1HPSS-C/L belongs to roller chain, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PHC 08B-1HPSS-C/L and any equivalents.

For drives that need to keep two shafts turning in step, the SKF PHC 08B-1HPSS-C/L roller chain is a single-strand transmission chain built to European 08B dimensions. Because it arrives from the factory already lubricated, it can go straight onto the sprockets. MR Industrial Accessories supplies this chain as part of its power transmission range and helps buyers confirm that the reference matches the drive they are replacing.

Reading the code makes ordering straightforward. PHC points to the SKF roller chain family. The 08B block sets the chain size under the European system: a half-inch pitch with a standardized roller diameter. The single digit 1 means one strand, so a 2 in that position would signal a double-strand version. HPSS tells you the plates received a surface treatment intended to resist corrosion, while C/L confirms factory lubrication, meaning the chain is ready to mount as delivered.

These chains turn up in a broad range of plants. Food processing conveyors, bottling equipment, packaging lines and textile machinery are common homes for them, along with material handling systems, bucket elevators and drives running at low to medium speed. Agricultural harvesters and processing equipment also rely on them. The steel construction and factory lubrication suit dusty or moderately humid settings, provided routine maintenance is carried out.

When choosing a chain, work from the power to be transmitted, the shaft speed and the tooth count on each sprocket. The 08B size covers moderate loads; where more capacity is needed, a double strand or a larger pitch can be considered. Alignment of the sprockets matters at installation, since offset wears the chain faster. Even with factory lubrication, oil or grease should be renewed according to the duty cycle, and tension should be checked regularly, as an over-tight chain loads the bearings while a slack one can climb the teeth.

On interchangeability, any chain meeting the European 08B standard with the same strand count can serve as a replacement. Nomenclature varies between manufacturers, though, so codes with different letters or digits may still describe the same chain. The reliable route when ordering a replacement is to give the full part number together with the pitch and inner width measurements. If you can bring the original chain or its data, our team will help you match it.