SKF PER.W208RPP53 y-bearing (insert bearing)

SKF PER.W208RPP53 belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.W208RPP53 and any equivalents.

The PER.W RPP from SKF is a Y-bearing insert with a spherical outside diameter and set screws that lock it onto the shaft. It suits equipment running under moderate load where some self-alignment is useful, such as conveyors, fans and farm machinery. MR Industrial Accessories supplies this line and can help you match the insert to the housing and the working conditions.

The code carries the key selection data. PER marks the insert family with a spherical outer ring. W tells you the bearing locks to the shaft with set screws. RPP identifies the seal: a double lip with a metal shield. Characters placed after the W and the RPP point to diameter and sealing or locking variants, so PER.W208RPP10, PER.W208RPP53 and PER.W211RPP2 belong to the same base but differ in diameter or seal style. Confirm the full designation before you order.

Typical applications include belt conveyors, bucket elevators, mixers, fans and agricultural implements. Grain plants, meat processing facilities, tanneries and food factories are common sites, since dust and moisture are usually present. Because the outer ring is spherical, small misalignments in the housing are absorbed, which makes assembly easier on welded or folded sheet metal frames.

When choosing an insert, check three things: shaft diameter, seal type for the environment (RPP where dust or water is a factor) and locking method. Set screws are simple to use, but over-tightening can score the shaft. At installation, clean the seat, make sure the shaft is free of burrs and tighten the screws with the correct wrench. Proper initial lubrication plus routine inspection support a longer service life.

Inserts from different makers often share standardized dimensions, yet the seal and locking suffixes vary from one manufacturer to another. Never swap one part number for another until diameter, width and seal type are confirmed. If anything is unclear, send the number marked on the bearing or the shaft and housing measurements, and MR Industrial Accessories will help you identify the right SKF variant.

For a quote, send the complete part number and the quantity you need by WhatsApp or email. If the number is not available, a photo of the part or its main dimensions is enough for us to guide you. We supply the SKF line and can also suggest alternatives within the same product type.