SKF PER.UC205-16-D y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.UC205-16-D belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.UC205-16-D and any equivalents.
The SKF PER.UC-D Y-bearing is a set-screw insert designed to fit into split plummer block or pillow block housings. It suits applications where the shaft turns and alignment is straightforward, such as conveyors, fans, and mixers. The insert mounts directly on the shaft without extra machining and handles moderate radial loads.
The code PER.UC-D breaks down as follows: PER identifies the insert series with set screws, UC specifies set-screw locking on the inner ring, and D denotes a sealing or design variant. In a reference like PER.UC205-16-D, the number 205 indicates the size and the suffix -16 gives the shaft diameter in inches (16/16 = 1 inch). To select the correct insert, refer to the full code on the nameplate or housing.
These bearings are found in the food, textile, chemical, and transport sectors. They are installed in split plummer block, pillow block, or flange housings to support shafts on belts, elevators, agitators, and dryers. The sealing helps protect against dust and ambient humidity. Because they are inserts, you can replace just the bearing without changing the housing, which simplifies maintenance.
When choosing, confirm the shaft diameter, the locking method (set screws or eccentric), and the sealing required for the environment. During installation, clean the shaft and housing, apply the recommended tightening torque to the set screws, and check axial clearance. Factory lubrication is typically sufficient, but severe conditions may call for replenishment. Align the housing to prevent parasitic loads.
Cross-brand equivalents are matched by dimensions and locking type: a UC insert from another brand with the same shaft diameter and size can be interchanged, but verify tolerances and sealing. Not all suffixes are compatible. We can help you find the equivalent reference.
If you have the Y-bearing or housing code, send it via WhatsApp or email. With that information, we will quote the correct part and suggest alternatives if needed.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does PER.UC-D mean in a Y-bearing?
- PER indicates the insert series with set screws, UC the set-screw locking on the inner ring, and D a sealing or design variant. The following number, such as 205, defines the size, and the suffix -16 gives the shaft diameter in inches.
- How do I choose the right Y-bearing for my equipment?
- You need the shaft diameter, the locking method (set screws or eccentric), and the working environment to determine the sealing. Also check the housing where it will be mounted. With that data, we can help you select the correct reference.
- Can I replace a Y-bearing from another brand with an SKF one?
- Yes, if the main dimensions, shaft diameter, and locking type match. Equivalences are based on dimensional standards, but seals and tolerances may vary. Contact us with the original code to confirm interchangeability.