SKF PER.FT204-HA y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.FT204-HA belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.FT204-HA and any equivalents.
For maintenance and purchasing teams, the SKF Y-bearing with insert bearing is a ready-to-mount assembly: an insert bearing seated in a cast iron or stamped steel housing that bolts to the frame and accepts a shaft. You will see it on conveyors, fans and farm equipment where alignment is straightforward and quick service matters.
Reading the code helps you order the right replacement. In PER.FT204-HA or PER.FT208-HA, PER stands for the housing series, FT for a flanged housing with a square or rectangular flange, and the number (204, 208) sets the insert size and therefore the shaft diameter. The -HA suffix points to a variant of the insert, typically tied to sealing or material.
These units show up on belt conveyors, bucket elevators, mixers, centrifugal fans and process lines, as well as in agricultural equipment, food plants and material handling. Their bolt-on format makes field replacement and alignment simpler, which is why they are chosen where easy maintenance outweighs the need for maximum rotational precision.
When selecting, confirm shaft diameter, housing style (flange, take-up, pillow block) and operating conditions. The insert seal should handle the dust, moisture or washdowns present. At mounting, keep the support surface clean and flat, slide the shaft in without impact, lubricate properly and align carefully to avoid premature failure.
Interchangeability across brands is possible when key dimensions match: shaft diameter, hole spacing and center height. Sealing suffixes and tolerances can differ, though. For a quote, send the full part number and, if available, the shaft and old housing dimensions to reduce the chance of a mismatch.
To replace a Y-bearing with insert bearing, share the stamped part number or main dimensions via WhatsApp. The team helps you identify the correct variant in the SKF line we supply and answers mounting or lubrication questions.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I find the right housing size?
- The number in the designation, such as 204 or 208, indicates the insert bearing size and the shaft diameter. Measure the shaft with a caliper and check the series table. If unsure, send the part number and dimensions via WhatsApp.
- What does -HA mean on these housings?
- -HA identifies a specific insert variant, usually related to sealing or material. To confirm the exact configuration for your application, contact us with the full part number and operating conditions.
- Can they be mounted in any orientation?
- Most flanged housings allow several orientations, but keep the hole positions and grease fitting location in mind. Poor alignment speeds up wear. If you need help, contact us via WhatsApp.