SKF PER.FC209-HX-A y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.FC209-HX-A belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.FC209-HX-A and any equivalents.
The SKF PER.FC series covers Y-bearing units that arrive already assembled, pairing an insert bearing with a housing so the shaft can be supported without extra fitting work. They suit equipment where self-alignment is useful and mounting needs to stay simple. MR Industrial Accessories LLC supplies this line and assists with configuration choices based on shaft size and the loads involved.
Reading the code helps you order the right unit. PER.FC is the series identifier. In PER.FC207-HX-A and PER.FC209-HX-A, the digits 207 and 209 correspond to the insert bearing size, which sets the shaft diameter the unit fits. HX marks a design variant inside the series, and the trailing -A points to a specific housing version. Confirm each position against the dimension table, or forward the full code to MR for verification.
Typical installations include belt conveyors, bucket elevators, mixers, fans, centrifugal pumps and other process equipment in food, chemical and aggregate plants, as well as agricultural machinery such as seeders and harvesters and low to medium power transmission drives. The compact, self-aligning construction tolerates slight misalignment between shaft and housing.
Selection comes down to shaft diameter, whether the load is radial, axial or combined, and the operating environment. Look at the sealing arrangement: inserts commonly use lip seals or oil seals to keep out dust and moisture. Lubrication can be permanent or require greasing at intervals, depending on the version. Mount on a flat, clean surface and follow the maker's fitting steps for the insert; alignment affects how long the unit lasts.
Interchangeability needs care. Units from different brands can vary in center height, mounting hole spacing and fixing method, so a similar code does not automatically mean a direct swap. Compare actual dimensions before replacing, or ask a specialist. MR Industrial Accessories LLC can identify a suitable alternative from the brands it supplies.
To replace a unit, send the complete product code to MR by WhatsApp or email. The team can confirm the configuration, check the SKF line and recommend the best fit for your equipment, and will also answer questions about other brands and equivalent options.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I find the shaft diameter from a PER.FC code?
- The middle digits, such as 207 or 209 in PER.FC207-HX-A, indicate the insert bearing size and the matching shaft diameter. Verify the exact measurement in the manufacturer's table or send the full code to MR.
- What does the HX suffix indicate?
- HX identifies a particular design variant within the PER.FC series, which may involve sealing, housing material or mounting details. Ask the MR team to confirm what your code includes.
- Is periodic lubrication needed?
- That depends on the insert version. Some inserts are lubricated for life, while others have grease nipples for scheduled greasing. Check your product specification or ask MR.