SKF PER.CFT207-HA y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.CFT207-HA belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.CFT207-HA and any equivalents.
The SKF PER.CFT-HA is a Y-bearing, also called an insert bearing, that locks onto the shaft with set screws. It mounts in split plummer block housings or pillow blocks, giving the shaft a rigid support that can be removed without dismantling the whole line. Typical duties include conveyors, mixers and fans, and the sealed design suits dusty or moderately humid areas. MR Industrial Accessories supplies this line as part of its bearing range for industrial maintenance.
Reading the code helps you order the right size. PER stands for the Y-bearing series with its particular sealing and locking arrangement; CFT describes how the bearing mounts and how the outer ring is shaped; the figure that follows, 205, 206, 207, 209, 210 or 211, sets the size by shaft diameter. The HA suffix marks an execution variant, usually tied to the insert material or its treatment. PER.CFT205-HA and PER.CFT211-HA show how the designation shifts with shaft size.
These bearings appear in transmission and conveying equipment across industrial plants: belt conveyors, bucket elevators, mixers, dryers, fans and centrifugal pumps. Food processing, chemical, cement, mining and aggregate operations rely on them, as do agricultural machinery and material handling systems where a support has to come off without pulling the shaft.
Selection comes down to shaft diameter, the load case (radial, axial or combined) and the working environment. Sealing matters most where dust or water is present, so a version with heavier protection seals is worth considering. Lubrication should match the speed and temperature of the application; many Y-bearings arrive pre-lubricated and need no further attention. When mounting, check housing alignment and tighten the set screws properly so the inner ring does not slip on the shaft.
On equivalents: Y-bearings follow international standards that let codes cross between brands, yet dimensions and tolerances can differ. Before swapping one brand for another, confirm shaft diameter, overall width and locking method. The reliable route is to match the full designation and the main dimensions. If anything is unclear, send us the original code and we will help you identify a suitable alternative.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the designation PER.CFT-HA mean?
- PER identifies the Y-bearing series; CFT covers the mounting type and outer ring configuration; the number (205, 206, etc.) gives the size for the shaft diameter; HA is a suffix for an execution variant, generally related to the insert material or treatment.
- Does this bearing come pre-lubricated?
- Most Y-bearings in this series are supplied pre-lubricated and need no extra maintenance under normal conditions. In severe applications or at high temperatures, lubrication may need periodic checking. Ask us about your specific operating conditions.
- How do I know if it fits my current housing?
- Check the shaft diameter, the overall width of the bearing and the locking type (set screws, eccentric, etc.), then compare them with the original bearing. Send us the old code or the dimensions and we will confirm compatibility with the PER.CFT-HA.