SKF PER.6802-2RSU deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.6802-2RSU belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.6802-2RSU and any equivalents.
The SKF PER.2RSU is a single-row deep groove ball bearing that handles moderate radial and axial loads in both directions. It comes with contact seals on both sides and a snap ring groove, so it suits dusty, damp or splash-prone locations where keeping grease in and contaminants out matters. You will find it in electric motors, pumps, fans, conveyors and agricultural equipment, with both metric and inch sizes offered.
Reading the code: the PER. prefix marks the thin-section deep groove ball bearing series, while 2RSU combines 2RS (contact seals on both sides) and U (snap ring groove). Take PER.6802-2RSU: 6802 is the thin-section size. If another size's code is unclear, send the full part number and we will check it.
These bearings show up in low and medium power electric motors, centrifugal pumps, fans, conveyor belts, machine tools and farm machinery. They also fit tight radial spaces such as compact gearboxes or light transmission mechanisms. The sealed design keeps lubrication in and dust or moisture out, cutting maintenance in food, textile, ceramic and aggregate plants.
Selection depends on shaft diameter, housing size and load type. The 2RSU seal is factory-lubricated and needs no extra grease; for high speed or high temperature, confirm the seal is right. Align shaft and housing during mounting, avoid hitting the seals, and use pullers that grip the inner ring for removal. Adding lubricant is only possible with open designs.
Deep groove ball bearings interchange between brands when bore, outer diameter, width and seal type match. Thin-section series often have equivalents, but suffixes differ: a contact seal might appear as 2RS, 2RSH or similar. Always check the complete part number and tolerances before replacing. MR supplies SKF and can point you to an equivalent.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does 2RSU mean on this SKF bearing?
- It means the bearing has contact seals on both sides (2RS) plus a snap ring groove (U), which helps retain lubricant and block contaminants in dusty or humid settings.
- Does this bearing need additional lubrication?
- No. Sealed PER.2RSU bearings arrive lubricated for life, so adding grease or oil is not required. If relubrication is needed, choose an open or capped design instead.
- How do I request a quote for an SKF PER.2RSU bearing?
- Send the complete bearing part number by WhatsApp or email to MR. If you do not have it, provide shaft and housing dimensions and we will help identify it. We reply promptly with a quote.