SKF PER.207RRSB-FC-A y-bearing (insert bearing)

SKF PER.207RRSB-FC-A belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.207RRSB-FC-A and any equivalents.

This SKF Y-bearing insert belongs to the PER.RRSB-FC-A series. It has an extended inner ring and is secured with set screws, so it fits into split plummer block or pillow block housings. The design suits shafts running at moderate speeds where a compact, sealed unit that is simple to swap out is needed. MR Industrial Accessories LLC supplies this SKF line and helps you match the right variant to your equipment.

Reading the part number helps you order correctly. The first block, PER, tells you it is a Y-bearing insert with an extended inner ring and set screw locking. The digits that follow, such as in PER.207RRSB-FC-A, give the insert size. RRSB stands for a double contact seal, and FC-A identifies a specific outer ring design. When you need a replacement, use the complete designation shown on the machine.

You will find these inserts in belt conveyors, bucket elevators, mixers, screens and packaging lines. They are common in food processing, cement, cold storage and grain handling, where dust, moisture or washdowns are part of daily operation. The seal and the screw locking make field replacement straightforward, with no press required and no need to take the housing apart completely.

Selection starts with the shaft diameter and the housing type you plan to use. The RRSB seal handles particles and liquids; for submerged duty or pressure washing, add extra protection. When mounting, clean the shaft seat, tighten the set screws with the right wrench and verify alignment between housings. Proper lubrication and periodic retightening of the screws keep the insert running longer.

Inserts from different makers can be swapped when the key dimensions, locking method and sealing match. An extended-ring insert with set screws can replace another with the same setup, regardless of brand. Do not go by the number alone: check shaft diameter, inner ring width and screw thread. If anything is unclear, send the original part number and your shaft measurements.

MR Industrial Accessories LLC supplies the SKF line. To order this insert or confirm it fits your application, message us on WhatsApp with the part number PER.207RRSB-FC-A or with your shaft and housing dimensions. We will come back with the option that works for your equipment.