SKF PCMS 2005003.06 M friction bushing
- Brand
- SKF
- Category
- Bushings and sleeves
- Subcategory
- Friction bushings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PCMS 2005003.06 M belongs to friction bushing, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PCMS 2005003.06 M and any equivalents.
SKF PCMS M series friction bushings are sliding elements built to lower friction where surfaces move against each other. They support and guide components in many types of industrial machinery while keeping maintenance needs low. The design handles loads and oscillating motion, which helps protect shafts and housings over time. MR Industrial Accessories LLC supplies this line to customers throughout the United States and Latin America, and can help you match the right bushing to your application.
The PCMS M code tells you both the product family and its size. Take PCMS 2005003.06 M: the string identifies a PCMS series bushing with a 20 mm inner diameter, a 50 mm outer diameter and a 3.06 mm width. The trailing M points to a particular material or design version. Reading the code this way lets a maintenance planner confirm the dimensions before ordering.
You will find these bushings in the food, chemical, automotive and machine tool sectors. Typical installation points include joints, camshafts, pumps, compressors and transmission assemblies. They also appear on production lines, packaging machinery and agricultural equipment, where resistance to wear and the ability to carry moderate loads keep operations running.
When choosing a PCMS M bushing, review the load, the sliding speed and the operating environment. Shaft and housing tolerances must be checked, along with the specified mounting clearance. Grease or oil lubrication, applied as recommended, helps the bushing last longer. Correct alignment during installation prevents uneven loading and early wear, and a suitable seal keeps contaminants out.
For equivalences, SKF PCMS M bushings can be replaced by products from other makers that use similar standards, such as other PCMS series. Dimensions and material still need to be verified, because not every bushing swaps directly. Always compare the technical data before fitting a replacement.
To request a quote for SKF PCMS M series friction bushings, send the part number or the measurements by WhatsApp or email. MR Industrial Accessories LLC can suggest equivalents and help you select the correct option for your equipment.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the PCMS M designation mean in SKF bushings?
- PCMS M identifies the SKF friction bushing series. The numbers that follow give the dimensions: in PCMS 2005003.06 M, the inner diameter is 20 mm, the outer diameter is 50 mm and the width is 3.06 mm. The final M indicates a material or design variant.
- In which applications are PCMS M bushings recommended?
- They suit joints, shafts, pumps, compressors and transmission equipment. The food, chemical, automotive and machine tool industries use them where friction must be reduced and moderate loads carried with minimal maintenance.
- How is an SKF PCMS M friction bushing mounted?
- Check the shaft and housing tolerances and make sure alignment is correct. Apply the recommended lubrication and avoid impacts that could deform the bushing. Following the manufacturer's instructions supports proper operation and longer component life.