SKF PCMF 202311.5 E friction bushing
- Brand
- SKF
- Category
- Bushings and sleeves
- Subcategory
- Friction bushings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PCMF 202311.5 E belongs to friction bushing, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PCMF 202311.5 E and any equivalents.
SKF PCMF E plain bearings are thin-wall, self-lubricating bushings built to handle radial loads in rotating or oscillating motion. They help lower friction and wear between metal surfaces without needing extra lubrication in many cases. Their slim profile and load capacity suit tight spaces where dependable operation matters.
The part number tells you the size. PCMF is the SKF plain bearing family, and the E at the end is a design variant. The digits that follow are in millimeters: first two for bore, next two for outside diameter, last two for width. So PCMF 060804 E means bore 6 mm, outside diameter 8 mm, width 4 mm. If you see a decimal like PCMF 081005.5 E, that points to a non-integer width.
You will find these bushings in machine tools, packaging lines, transmissions, agricultural equipment, and automotive assemblies. They are also common in repairs of presses, pumps, fans, and conveyors, where a worn bushing must be replaced while keeping dimensions accurate. Because they are self-lubricating, they work well in hard-to-reach spots that cannot be greased regularly. Their radial load support makes them a solid choice for joints and rotating shafts in tough conditions.
Selecting the right PCMF E bushing starts with checking shaft and housing dimensions, then load and speed. Install them carefully to keep alignment true and avoid early wear. Clean the mating surfaces and press evenly with light force, without hammering that could harm the friction layer. Even though they are self-lubricating, extra lubrication can help at high speeds or heavy loads. Always review the technical data for your specific case.
For cross-reference, SKF PCMF E bushings can stand in for similar products from other makers if the dimensions and load ratings line up. Look beyond metric sizes to compare material and construction, since small differences can change performance. While other options exist, SKF precision is a plus in critical applications. To make a safe swap, have a specialist review the conditions of your application.
To request a quote for SKF PCMF E plain bearings, MR Industrial Accessories is here to help. Send the part number or measurements through WhatsApp or email, and we will reply promptly. We can also suggest equivalents and help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the PCMF E code indicate?
- PCMF is the SKF plain bearing series, and E is a design variant. The following numbers are millimeter dimensions: bore, outside diameter, and width. For example, PCMF 060804 E has a 6 mm bore, 8 mm outside diameter, and 4 mm width.
- Do these bushings need lubrication?
- They are self-lubricating and usually require no additional lubrication. In high-speed or high-load applications, supplementary lubrication may be beneficial. Check the manufacturer's recommendations for your specific use.
- How do I select the correct PCMF E bushing?
- Confirm shaft and housing dimensions, plus load and speed conditions. The part number gives the sizes in millimeters. For a precise selection, share your application data with our technical team.