SKF PBMF 304030 M1G1 friction bushing
- Brand
- SKF
- Category
- Bushings and sleeves
- Subcategory
- Friction bushings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PBMF 304030 M1G1 belongs to friction bushing, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PBMF 304030 M1G1 and any equivalents.
SKF PBMF friction bushings suit setups where space is tight and you want a part that needs little attention while still carrying radial loads. MR Industrial Accessories LLC supplies this line alongside its power transmission and support components for plants in the United States and Latin America.
Reading a PBMF code tells you the bushing family and its size. The digits in the middle give the bore, outside diameter and width, and the M1G1 suffix points to how the part is built and what it is made of. The safest way to pick a code is to work from the drawing or from measurements taken on the shaft and housing.
You will find these bushings in presses, pumps, fans, conveyors, machine tools and lifting equipment. Maintenance crews in food, chemical, cement and steel operations use them when a worn bushing has to come out without reworking the surrounding assembly. The thin wall makes for straightforward fitting into a machined housing and gives a close fit.
Selection comes down to radial load, speed and the environment around the bushing. Press the part in or use the proper installation tool, and confirm that shaft and housing are aligned. Depending on the material and the type of movement, lubrication may last for the life of the part or need periodic greasing. Keep to the specified clearance and avoid impacts that could distort the wall.
PBMF bushings from SKF can be replaced with equivalents from other manufacturers when dimensions and material properties line up. The codes will not match one to one, but the function can be the same. Before substituting, compare tolerances, load capacity and operating conditions.
For a quote on SKF PBMF series friction bushings, send the complete code or your housing and shaft measurements by WhatsApp or email. MR Industrial Accessories LLC can also suggest equivalents and help you choose the right part.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the PBMF designation mean on SKF bushings?
- PBMF is the family name for these SKF friction bushings. The numbers that follow cover standardized dimensions, and the suffixes describe material or construction details. For a specific code, check with a specialist and confirm the actual measurements of the part.
- How do I know which bushing I need for my machine?
- Measure the shaft diameter, the housing bore and the width you have available. Those figures, together with load and speed, point to the correct bushing. If you already have the original code, send it over and we will help you match it.
- Are SKF PBMF bushings interchangeable with other brands?
- They can be swapped with bushings from other manufacturers when dimensions and material properties are the same. There is no universal code equivalence, so tolerances and load capacity need to be checked before you replace. Ask us and we will guide the selection.