SKF P2BT 115-TF y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF P2BT 115-TF belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2BT 115-TF and any equivalents.
The SKF P2BT is a ready-to-mount unit that pairs a Y-bearing insert with a split cast iron housing. It carries rotating shafts on conveying and transmission equipment, and it suits installations where mounting is straightforward and the bearing needs protection from dust and moisture. MR Industrial Accessories LLC supplies this series within its housing and mounted unit range.
Reading the code helps you order the right unit. P stands for the split housing design, 2 sets the housing type, and BT identifies the mounting variant. The -TF suffix tells you which insert seal is fitted: it holds grease in and keeps contaminants out. Take P2BT 115-TF as an example; 115 is the shaft diameter the unit accepts. Have your shaft size and mounting arrangement ready before you pick a number.
You will find these units on belt conveyors, bucket elevators, mixers, screens and packaging lines, as well as in screw conveyors and norias in agricultural settings, on washdown equipment in food plants, and on rollers and fans in metalworking shops. Because the housing splits, a unit can be fitted or swapped out without pulling the shaft apart, which keeps corrective maintenance work short.
Selection comes down to three things: shaft diameter, insert mounting type, and a seal that matches the environment. The -TF version fits areas with moderate dust or moisture. When mounting, line up both housing halves and draw the bolts down evenly. Follow the working conditions for lubrication, and make sure the shaft is free of burrs. Good alignment is what keeps the bearing running properly.
Equivalent Y-bearing housed units come from several brands, and interchangeability rests on center height, shaft diameter and mounting system rather than the number alone. Compare those dimensions before substituting one brand for another. MR Industrial Accessories LLC can help you match a replacement if you send the measurements of your original housing.
If the housing part number is on hand, send it by WhatsApp or email and the team will reply promptly with a quote. Without a number, a photo of the part plus the shaft dimensions works just as well, and we can also suggest equivalents and help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does -TF indicate on a unit such as P2BT 115-TF?
- It identifies the seal fitted to the insert bearing. That seal retains grease and restricts dust and moisture from entering, which suits moderately contaminated locations. The mounting dimensions of the housing stay the same.
- What information do I need to select the correct Y-bearing housed unit?
- Shaft diameter, insert mounting type and a sealing choice that fits the environment, along with load and rotation speed. With those details the P2BT series number points to the exact size. Send them by WhatsApp if you would like help.
- Is it possible to substitute another brand's housing with an SKF unit?
- Often yes, provided center height, shaft diameter and mounting system line up. The part number by itself does not confirm interchangeability. Check the dimensions of the housing you are replacing, or send a photo and the measurements for guidance.