SKF MRC.R10ZZ inch deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Inch deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF MRC.R10ZZ belongs to inch deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MRC.R10ZZ and any equivalents.
For shafts measured in inches, the SKF MRC.R series deep groove ball bearing offers a single-row design that handles moderate radial and axial loads in both directions. Its ZZ shielding keeps lubricant in and dust out, making it a practical choice for equipment built to imperial dimensions.
The part number breaks down into three elements: MRC identifies the line, the letter R signals the inch series, and the final number indicates the bore size in inches. A ZZ suffix means the bearing has two metal shields, one on each side. Common codes include MRC.R6ZZ, MRC.R8ZZ, MRC.R10ZZ, MRC.R12ZZ, MRC.R16ZZ and MRC.R24ZZ, spanning bore diameters from 3/8" to 1 1/2".
These bearings suit inch-based shafts in machine tools, pumps, fans, conveyors, transmission equipment and agricultural machinery. They are often found in maintenance of imported equipment and on lines that remain in imperial measurements. The shielded construction performs well in environments with moderate dust and humidity when alignment and lubrication are correct.
Selection starts with the shaft diameter in inches, which points to the matching MRC.R number. The ZZ shields are factory-installed and need no extra maintenance, but mounting with proper tools helps avoid shield damage. Lubrication is permanent in shielded bearings, so removing the shields is not advised. Check alignment between housings to prevent parasitic loads that can reduce service life.
Inch deep groove ball bearings from different brands can be interchanged when bore, outer diameter, width and sealing type match. SKF MRC.R series bearings have equivalents in other brands, but always confirm tolerances and internal clearance before replacing. MR Industrial Accessories supplies this brand and can advise on interchangeability based on the exact code.
To request a quote for SKF MRC.R series bearings, send the complete code via WhatsApp or email to MR Industrial Accessories. The team responds promptly and can suggest equivalents or help you choose the right bearing for your application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the ZZ suffix mean on MRC.R bearings?
- ZZ indicates two metal shields, one on each side. They block dust and particles and retain lubricant. They are not hermetic seals, so they are not recommended for immersion in liquids.
- How do I choose the right MRC.R number for my shaft?
- Measure the shaft diameter in inches and select the matching code. For example, MRC.R6ZZ fits 3/8" shafts, MRC.R8ZZ fits 1/2", and so on. If unsure, send us the measurement and we will help identify the correct bearing.
- Are SKF MRC.R series bearings interchangeable with other brands?
- Yes, if the main dimensions (bore, outer diameter and width) and sealing type match. However, internal clearance and tolerances can vary. Contact us with the exact code and we will indicate the equivalents.