SKF MRC.316SZZC deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF MRC.316SZZC belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MRC.316SZZC and any equivalents.
The SKF MRC SZZC deep groove ball bearing handles moderate radial and axial loads in either direction. Its two contact seals make it a good fit where dust or moisture is present. You will find it in electric motors, pumps, fans and similar equipment. MR supplies this brand and can help you match the right bearing to your application.
Reading the code: MRC is the deep groove ball bearing series from SKF. The SZZC suffix tells you the bearing has contact seals on both sides (S) and a steel sheet cage (ZZC). So a code like MRC.316SZZC is an MRC series bearing with those features. The seals keep contaminants out; the steel cage supports higher speeds. Understanding this naming helps you pick the correct replacement.
Sealed deep groove ball bearings like these are common in electric motors, centrifugal pumps, fans, conveyors and machine tools. They also appear in food, textile and chemical plants and in metalworking operations. Because they take combined loads and need little maintenance, they suit equipment that runs continuously. MR supplies these bearings to industrial customers across the United States and in several Latin American countries.
When selecting, consider the radial and axial load, the speed and the environment. Contact seals work well against dust and moisture but create slightly more friction than shields. Check that shaft and housing tolerances are correct and that the lubrication matches the specification. During mounting, do not strike the seals and make sure alignment is correct to help extend service life.
SKF MRC SZZC bearings can be interchanged with equivalent bearings from other brands that use the same dimensional designation. Always confirm bore, outer diameter and width, plus the sealing type. Interchange is possible when specifications align, but it is wise to consult a specialist to avoid premature failures. MR can guide you to the best option.
To request this bearing or confirm an equivalent, send the complete code by WhatsApp or email. MR will quote promptly and help with any technical question.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the SZZC suffix mean on an SKF MRC bearing?
- SZZC means the bearing has two contact seals (S) and a steel sheet cage (ZZC). The seals block contaminants, and the steel cage is suitable for high speeds. This setup is common where extra protection is needed.
- Does this bearing have a double seal?
- Yes, the MRC SZZC designation includes a contact seal on each side. This helps retain lubricant and keep out dust and moisture, which can extend service life in tough conditions. Always check the full code to confirm the sealed version.
- How do I request a quote for this bearing?
- Send the complete bearing code by WhatsApp or email and MR will reply with a quote. You can also ask about equivalents or other brands. MR assists you personally with selection.