SKF LL/VCI-R40-K centralized lubrication component

SKF LL/VCI-R40-K belongs to centralized lubrication component, part of our Greases and lubrication range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for LL/VCI-R40-K and any equivalents.

The code LL/VCI-R40-K is a Lincoln part number that points to one specific piece inside an SKF centralized lubrication system. Depending on which code you are dealing with, that piece may be a pump, a metering device, a fitting, a hose or a connector. The number itself is what ties the order to the right item, so it should always travel with the request.

Reading the code helps narrow things down. LL normally signals the Lincoln line, VCI identifies the block or family of the component, and 40 refers to its size or configuration. The -K at the end marks a variant inside that family, often tied to how it connects or to the kit it ships with. The safest way to confirm you have the right piece is to copy the code exactly as it appears on the drawing or the equipment nameplate.

You will run into these parts on production lines, presses, machine tools, mining equipment, cranes, conveyors and the lubrication circuits of industrial vehicles. Plants in automotive, food processing and cement, along with maintenance shops that service SKF Lincoln equipment, rely on them. A centralized system keeps lubricant moving to many points without an operator walking the line, which cuts manual maintenance hours and lowers the chance of a failure caused by a dry point.

When picking a replacement, look at how it fits the pump and the rest of the circuit: grease or oil, the pressure the system runs at, the flow it needs and the connection style. At assembly, keep threads clean and avoid bending hoses tighter than the recommended radius. Line up the metering devices properly and purge the circuit after any swap so trapped air does not stay in the lines.

Swapping in a part from another maker is not a straight exchange. The job may be the same, but threads, seals and dimensions can differ. Compare the original number against the Lincoln designation first, and bring in a specialist when they do not line up. Our team can identify the component from the code or from a photo.

To get a quote, send the code LL/VCI-R40-K over WhatsApp or email, ideally with a picture of the part or the spot where it sits. If the number is unclear, describe the equipment you are repairing and we will help you pin it down. We supply the SKF Lincoln line and can suggest equivalents when a direct match is not obvious.