SKF LHHA 100 / 208 oil
- Brand
- SKF
- Category
- Greases and lubrication
- Subcategory
- Greases and lubrication
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF LHHA 100 / 208 belongs to oil, part of our Greases and lubrication range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for LHHA 100 / 208 and any equivalents.
The SKF LHHA line covers greases intended for centralized lubrication systems, where they must be pumpable and release oil in a controlled way to keep a stable film on bearings and guides. They suit continuous processes in steel, cement and similar operations where maintenance intervals matter.
Reading the code is straightforward. The first figure is the base oil viscosity grade: 32, 46, 68 or 100. The figure after the slash gives the pack format: 20 means a box of 20 cartridges, while 208 means a 208-liter drum. So LHHA 32/20 is a 20-cartridge pack at viscosity 32, and LHHA 100/208 is a 208-liter drum at viscosity 100.
These greases appear in steel, cement, mining and food plants, on roller bearings, plain bearings, linear guides and transmission chains. They handle high loads, moderate temperatures and damp or dirty conditions. Resistance to water washout and mechanical stability keep them working in centralized systems that run without stopping.
Viscosity drives selection. A higher grade carries more load but resists pumping more; the range from 32 to 100 lets you match speed and temperature. Before assembly, clean the lubrication points and check that the new grease is compatible with the old one. Centralized systems need defined working pressures, so follow the system builder's recommendations to avoid overpressure.
SKF LHHA greases can replace other brands with the same viscosity and thickener type, but mixing different bases may change performance. If you are swapping out an existing grease, confirm chemical compatibility first and ask our team for guidance.
To get a quote, send the full code by WhatsApp or email. Tell us the viscosity and pack size you need, and we will reply promptly. We can also suggest equivalents and help you choose the right grease for the application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the number after the slash in LHHA 32/20 mean?
- It indicates the pack size: 20 is a box of 20 cartridges, and 208 is a 208-liter drum. The number before the slash (32, 46, 68, 100) is the base oil viscosity grade. This makes it easy to pick the format and viscosity for your system.
- Can I use this grease in high-speed bearings?
- Yes, but choose the viscosity carefully. Lower grades such as 32 reduce resistance and heat at high speed. Higher grades such as 68 or 100 provide a better film under heavy loads and low speeds. Check the bearing manufacturer's recommendations.
- How do I request a quote for SKF LHHA greases?
- Send the full code (for example, LHHA 46/208) via WhatsApp or email. Tell us how many packs you need, and we will reply with a quote. We can also advise on viscosity or pack type if you are unsure.