SKF JLM 104910 AA tapered roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF JLM 104910 AA belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for JLM 104910 AA and any equivalents.
A single-row tapered roller bearing from the SKF JLM AA series handles radial and axial loads acting in one direction. The tapered rolling geometry produces linear contact along the raceways, which helps distribute load across the assembly. Gearboxes, wheel shafts and other industrial machinery that calls for rigidity and precision are typical homes for this design.
Reading the code helps when you need a replacement. The JLM prefix points to a tapered roller design built to established international dimensions, while the AA suffix marks a construction variant, usually tied to contact angle or how the raceways are machined. Take JLM 104910 AA: the central digits carry the size and load information, so the full code is what you should match, not just the prefix.
Where does this series show up? Gearboxes, rear axles on vehicles, road-building machinery, mining equipment and conveyor lines, along with food processing plants and power generation sites. Combined load support and resistance to fatigue are what make the series work in these conditions, where dependable operation over a long service period matters.
Selection starts with the loads the bearing will see, radial and axial, plus the speed and temperature of the application. Installation calls for proper alignment and correct lubrication, and the manufacturer's guidance on internal clearance and tightening should be followed. In dirty or wet surroundings, a sealed configuration keeps contaminants away from the raceways. Poor mounting practice is a common cause of short bearing life.
On interchangeability, bearings made by other manufacturers to the same dimensional and tolerance standards can serve as replacements. Check the complete code and the technical data first, because contact angle or heat treatment differences between brands can change how the bearing performs. MR Industrial Accessories LLC supplies this brand and can review compatibility for you.
For a quote on an SKF JLM AA series tapered roller bearing or any other part, send the code to MR Industrial Accessories LLC through WhatsApp or email. The team answers promptly and can point you to equivalents or help you choose the right component.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the AA suffix mean in an SKF JLM bearing?
- It identifies a construction variant within the JLM series, generally linked to a specific contact angle or raceway design. The manufacturer's technical documentation is the way to confirm the exact meaning, or you can ask MR Industrial Accessories LLC.
- Can this bearing take axial loads in both directions?
- No. A single-row tapered roller bearing carries axial load in one direction only. Two bearings mounted in opposition are needed for both directions, so the shaft arrangement has to be planned accordingly.
- How do I check whether another brand replaces the SKF JLM AA?
- Compare bore, outer diameter and width, then tolerances, load capacity and contact angle. MR Industrial Accessories LLC can help validate the equivalence if you send the code via WhatsApp.