SKF HME 3084 lock nut
- Brand
- SKF
- Category
- Bushings and sleeves
- Subcategory
- Lock nut
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF HME 3084 belongs to lock nut, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HME 3084 and any equivalents.
The SKF HME 3084 is an axial fastening nut used when a bearing is mounted on an adapter sleeve. It holds the sleeve and bearing in place on the shaft and allows controlled, precise adjustment. In power transmission and rotating equipment, this type of nut is a small but critical part of a secure assembly.
The code HME 3084 breaks down into the HME series prefix and a number that defines the nut size and thread. When you need to match a nut to a sleeve, start with the shaft diameter and the sleeve model: the nut must screw onto the sleeve thread without play. If you are unsure which nut fits, send the sleeve code or the thread dimensions and we can confirm the match.
Lock nuts in this series are found in demanding sectors such as steel, food processing, cement and mining. Typical equipment includes conveyors, mills, pumps, fans and other power transmission drives. They are also a standard item in bearing maintenance and mounting work, where axial fastening must be both safe and adjustable.
Selection depends on the sleeve thread diameter and pitch, and on the bearing being mounted. Before installation, clean the threads and apply the torque specified by the manufacturer. Proper alignment and lubrication during mounting support a reliable fit and help the bearing reach its expected service life.
SKF lock nuts can be replaced by nuts from other manufacturers that share the same dimensional and thread standard. If you have a competitor's code, we can identify the corresponding equivalent. The HME series is widely referenced, and substitution works as long as dimensions and thread pitch are respected.
To request a quote for the SKF HME 3084 or another reference, contact us on WhatsApp or by email. We will quote the exact code or size you need and can also help you select components for your application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What is the SKF HME 3084 lock nut used for?
- It axially secures adapter sleeves and bearings on shafts. This fastening part allows safe, precise adjustment in assemblies that need a firm connection, and it simplifies bearing mounting and dismounting.
- How do I know if the HME 3084 nut is compatible with my sleeve?
- Check the sleeve diameter and thread pitch. The HME 3084 nut is made for a specific SKF sleeve size. If you are not sure, send us the sleeve code or the measurements and we will identify the right nut.
- Can I replace a nut from another brand with the SKF HME 3084?
- Yes, provided the dimensions and thread type match. Lock nuts generally follow international standards, so interchangeability between brands is possible. Send us the original part code and we will quote the SKF equivalent.