SKF H 913842/810/QCL7C tapered roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF H 913842/810/QCL7C belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for H 913842/810/QCL7C and any equivalents.
Tapered roller bearings from SKF handle radial and axial forces at the same time. Their roller and raceway geometry spreads the thrust progressively along the raceway, which suits shafts that need both guidance and thrust absorption, such as gearbox housings, wheel hubs and transmission equipment. MR Industrial Accessories LLC supplies this line to customers across the United States, Canada, Mexico and South America.
The code of this series is split into two blocks by a slash. The first block, with the letter H and the assembly number, defines the size group. The second block, three digits, refers to the cone bore. In H 913842/810/QCL7C and H 913843/810/QCL7C the assembly number changes while the 810 bore stays the same, and QCL7C appears at the end as the execution suffix. Quote the full code as it appears on the drawing or on the part.
Typical applications include gearboxes, speed reducers, milling equipment, conveyors and agricultural machinery, where the shaft takes radial load and thrust simultaneously. Wheel hubs and bevel gear transmission assemblies are also common. Since these are tapered roller bearings, they are generally mounted in opposed or matched pairs so each unit absorbs thrust in one direction and the assembly stays guided.
When selecting and mounting, watch the alignment of the raceways and the seat of the cone and cup. Misalignment speeds up wear and produces noise. Lubrication has to match the speed and operating temperature, and the axial clearance of the assembly is set during mounting, not on the loose part. On equipment running with vibration or variable load, check the tightening and the condition of the seats before replacing.
Cross-brand equivalents are matched by dimensions and cross-reference code. If a customer brings a reference from another manufacturer or an unidentified part, the bore diameter, outside diameter and assembly width are compared to find the interchangeable option. MR Industrial Accessories LLC also manufactures split pillow block housings, roller chains and sheaves.
To request this series or a specific size, send the code by WhatsApp or email and the team will reply promptly with a quote. You can also send the equipment model or the reference of the old part, and the team will suggest a compatible alternative and help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What type of load does a tapered roller bearing support?
- It is built for combined radial and axial loads. The roller and raceway arrangement lets thrust be distributed in one direction, which is why these bearings are usually mounted in opposed or matched pairs depending on how the shaft works.
- How should I send the code to get a quote?
- Send the complete code by WhatsApp or email exactly as it appears on the drawing or on the part, for example H 913842/810/QCL7C. The team replies promptly with a quote. The equipment model also helps locate the reference.
- What information do I need to choose the size?
- Ideally the bore diameter, the outside diameter and the assembly width, plus the code if you have it. With those dimensions the series is checked and the reference that fits the mounting is defined.