SKF GH 110X94.5X6.3-AD1 hydraulic seal
- Brand
- SKF
- Category
- Seals
- Subcategory
- Hydraulic seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF GH 110X94.5X6.3-AD1 belongs to hydraulic seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GH 110X94.5X6.3-AD1 and any equivalents.
SKF GH series hydraulic seals are components made for hydraulic cylinder rods. They keep hydraulic fluid contained and block outside contaminants from getting in while the system operates under pressure. The profile pairs a sealing lip with an energizing ring that maintains steady contact. These seals suit industrial and mobile equipment where dependable sealing and low friction matter.
The part number tells you the size. In a reference like GH 25X17.5X3.2-AD1, the code breaks down as follows: rod diameter 25 mm, outer diameter 17.5 mm, height 3.2 mm. The -AD1 ending points to a specific compound and lip design. Larger sizes follow the same pattern, such as GH 80X64.5X6.3-AD1. GH marks the family; the three numbers give the dimensions; AD1 is the elastomer formulation used across much of the series.
You will find these seals in hydraulic cylinders on agricultural machinery, road equipment, presses, cranes, and lifting systems. They also appear in steering and suspension cylinders on heavy vehicles. The GH series handles the moderate pressures and linear speeds typical of these setups, where dust and weather call for robust sealing.
Choosing the right seal starts with the rod and housing dimensions, the hydraulic fluid, and the operating conditions. Check that the inner diameter matches the rod and that the height fits the groove. When installing, lubricate the lip with the same oil used in the system, avoid twisting the seal, and confirm the rod has no burrs. Cylinder alignment and rod surface condition affect how long the seal lasts.
For a replacement, hydraulic seals are identified by dimensions and profile. Compare diameters and height, and take the compound into account. The SKF GH series can be interchanged with other seals of similar characteristics, but always confirm chemical compatibility with the fluid and the pressure and temperature conditions.
To request a quote for SKF GH series hydraulic seals, send the full part number and quantity on WhatsApp or by email. The team can suggest equivalents and help you choose the correct size.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I read the part number of an SKF GH series seal?
- Start with the letters GH, then three dimensions separated by X: inner diameter, outer diameter, and height. The -AD1 suffix identifies the compound variant. For instance, GH 25X17.5X3.2-AD1 is a seal with a 25 mm inner diameter, 17.5 mm outer diameter, and 3.2 mm height.
- What applications do GH series hydraulic seals have?
- They are used in hydraulic cylinders of agricultural, road, crane, and industrial equipment, as well as steering and suspension cylinders on heavy vehicles. They retain hydraulic oil and exclude dust and water under moderate pressure and reciprocating motion.
- How do I choose a replacement for a hydraulic seal?
- Measure the rod diameter, housing diameter, and groove height, then compare those with the original seal. Also verify that the elastomer is compatible with your hydraulic fluid. If you have doubts, send the measurements on WhatsApp and we will help you select the right seal.